Datasheet

128
Handheld instrument
Display / ControllerLogger / EASYBusTransmitterTemperature probeAlarm / Protection
OPTION: teon covered probe tube
(for use in salt water)
Sensor tube: V4A
Handle: polyamide
Cable: approx. 1m of
highly exible
cable (2 x 0.25²)
Sensor tube: V4A
Cable: exible silicone
cable (2 x 0.25²),
approx. 1m long
Screw-type sensor M10
Sensor tube: aluminium head,
Ø 8.4 mm
Cable: exible silicone
cable (2 x 0.25²),
approx. 30 cm
long
Immersion/touching/air sensor
upcharge per m of silicone cable
Sensor tube: V4A-head, Ø5 mm
Cable: approx. 1 m of
highly exible
silicone cable.
Sensor tube: V4A-head,
Ø 6 x 46 mm
Cable: approx. 1 m of
silicone cable.
Sensor tube: made of V4A,
with shrinkable sleeve at cable
outlet
Cable: approx. 1 m of highly ex-
ible silicone cable with
Ø 3.5 mm plug
Temperature probe for GPRT1400AN
Probe for permanent high temperatures
Mantle material: special steel with extraordinary
resistivity against oxidation at high temperatures and
excellent corrosion resistance in chlorine and am-
moniacial environments (Protective layer emerges at
temperatures above 980°C)
GTF101-N03250
-50 ... +1300°C
(short-term peaks up to 1330°C)
approx.
5 sec.
as above, however FL = 500mm
GTF101-N03500
stainless steel tube
(FL=250mm), 1m silicone
cable, loose cable ends
GTF101-N031000
as above, however FL = 1000mm
upcharge for any cable
length
Pt10Rh-Pt (Typ S) - measuring probes (class 1) for highest temperatures
NiCrSi-NiSi (Typ N) - meas. probes (class 1) low cost measuring of high temperatures (permanent up to 1300°C)
Probs with Pt100, Pt1000 or KTY 84 upon request. Accessories p.r.t. page 134-135
GTF 1400 B
Sensor: KTY 81-210
-20 ... +110°C
Replacement for KTY 11-6
* Replacement for KTY 11-6 in the range -20 ... +60°C
Response
time T
90
Application / Dimensions (mm)
Ordering type
Measuring range
further
technical details
stainless steel tube Ø8mm,
with reduced ceramic tube
Ø5.5mm, plastic handle,
silicone cable, DIN-type
at-pin plug type "S"
GBF 1550
+50 ... +1550°C
Bunsen burner probe
Probe tip can be directly exposed to the ame.
approx.
2 sec.
type S - wire
0.5 Ø
other probes (Typ N) please refer to pages 126 / 127
Silizium - Messfühler (Sensor: KTY ... )
GMF 11/180
Sensor: KTY 83-110
-50 ... +175°C
GMF 15/81
Sensor: KTY 81-121
-50 ... +60°C
GMF 15/180
Sensor: KTY 83-110
-50 ... +60°C
GMF 30/180
Sensor: KTY 83-110
-50 ... +60°C
GMF 30/210 *
Sensor: KTY 81-210
-50 ... +60°C
GMF 30/180 V4A
Sensor: KTY 83-110
-50 ... +175°C
GMF 30/81 V4A
Sensor: KTY 81-121
-50 ... +150°C