Datasheet

100
Ø
1,5
130
Ø
1,5
125
~1000
ca.
1,0
~1000
ca.
1,0
100
Ø
3
100
Ø
3
Handheld instrument
Display / ControllerLogger / EASYBusTransmitterTemperature probeAlarm / Protection
Response
time
T
90
NiCr-Ni Standard Measuring Probe "Type K" (ctd.)
Application / Dimensions (mm)
Range
°C
Ordering
type
further
technical details
-65 ... +250°C
-65 ... +200°C
-65 ... +400°C
-65 ... +200°C
-65 ... +400°C
-200 ... +1150°C
GTF
300 GS
GMF
250
GMF
200
GGF
200
GTE
130 OK
For high temperatures in gases, air and for
solid surfaces (not suitable for liquids)
Magnetic surface probe
sticks at magnetic materials, resilient measuring
probe with small metal plate, approx 5mm dia.
Magnetic surface probe
sticks at magnetic materials, resilient measuring
probe with small metal plate, approx 5mm dia.
Probe for deep-frozen products
to screw into deep-frozen products, etc.
no predrilling required
Insertion probe (plug-in type without cable)
for soft media
Immersion probe (also suitable for gases/air -
use as surface probe limited)
approx.
0,3 sec.
approx.
5 sec.
approx.
10 sec.
approx.
3 sec.
approx.
5 sec.
approx.
3 sec.
Pair of glass bre insulated
thermowell wires, 0,2 mm Ø
each, DIN-type at-pin plug.
Upcharge for special
length of probe
approx. 1m of twisted
teon insulated wire,
DIN-type at-pin plug
extended type
(higher magnetic force),
rigid 2m silicone cable,
DIN-type at-pin plug
Stainless steel (V4A) tube,
6 mm Ø with screw prod,
spiral cable (approx. 1.2
m drawn out),
DIN-type at-pin plug
Flexible stainless steel
(V4A) needle, 1.5 mm Ø,
DIN-type at-pin plug,
rigid connection
Thermowell, Inconel 1.5 mm
Ø, electrically insulated,
exible, DIN-type at-pin
plug, rigid connection
(other length or Ø p.r.t. p. 126)
-65 ... +300°C
GTF
300
Quick-response measurements in air, liquids,
for very small surfaces
approx.
0,3 sec.
Any length (up to 50m)
against upcharge.
Twisted pair of teon in-
sulated thermowell wires,
0,2 mm Ø each, welded
measuring prod, very ex-
ible, DIN-type at-pin plug.
Cable lug probe
-50 ... +250°C
GKF
250
1 m teon cable,
loose ends
Soldering tip probe
for direct connection to instrument
-50 ... +500°C
GLS
500
approx.
2 sec.
thermo couple springs
(~5mm) with laser welded
meas. point (wires 0.3 Ø),
ceramic tube approx. 6 Ø,
DIN-type at-pin plug
Tire probe
fast response insertion probe with stop screw (needle
adjustable 0 to 14 mm). Suitable for measuring tem-
perature of tires and other soft media.
-50 ... +200°C
GRF
200
plastic handle,
spiral cable (approx. 1.2m
drawn out),
DIN-type at-pin plug
approx.
5 sec.
Air-/Gas probe (changeable probe without cable)
limited suitable also for surfaces
-65 ... +400°C
GTO
130 OK
NiCr-Ni-wire 0,5 Ø,
welded and grinded at,
V4A-tube, DIN-type at-
pin plug, rigid connection
GTT
1150 OK