User manual

ManualsBrandsGREISINGER ManualsEnvironmental Testing EquipmentPressure gauge GDH 200-14 Non-corrosive gas 0 - 11 bar

H55.0.31.6C-04

GREISINGER electronic GmbH

D - 93128 Regenstauf, Hans-Sachs-Straße 26

phone: +49 9402 / 9383-0, fax: +49 9402 / 9383-33, eMail: info@greisinger.de

from Version 1.1 GDH 200-14

Operating Manual Vacuum- / Baro- / Manometer

Summary of content (8 pages)

PAGE 1
H55.0.31.6C-04 Operating Manual Vacuum- / Baro- / Manometer from Version 1.1 GDH 200-14 GREISINGER electronic GmbH D - 93128 Regenstauf, Hans-Sachs-Straße 26 phone: +49 9402 / 9383-0, fax: +49 9402 / 9383-33, eMail: info@greisinger.
PAGE 2
H55.0.31.6C-04 Operating Manual GDH 200-14 _____________________________________________________ page 2 of 8 _____________________________________________________________________________ Content 1 INTENDED USE..........................................................................................................................................3 2 GENERAL ADVICE ...................................................................................................................................
PAGE 3
H55.0.31.6C-04 Operating Manual GDH 200-14 _____________________________________________________ page 3 of 8 _____________________________________________________________________________ 1 Intended use The device measures the absolute pressure of air or non corrosive / non ionizing gases. Either the ambient air pressure can be measured or the measuring pressure is connected with a suitable tube to the connecting nozzle. Relative measurements can also be realized via the integrated Zero-function.
PAGE 4
H55.0.31.6C-04 Operating Manual GDH 200-14 _____________________________________________________ page 4 of 8 _____________________________________________________________________________ 5 Operation 5.1 Display elements 1: Main display Display of current measuring value or of minimal measured value (“Lo” blinking) or maximal value (“Hi” blinking) LOBAT Indicates low battery 5.
PAGE 5
H55.0.31.
PAGE 6
H55.0.31.6C-04 Operating Manual GDH 200-14 _____________________________________________________ page 6 of 8 _____________________________________________________________________________ 11 Configuration of the device Follow this instructions to configure the functions of the device: Switch the device off. Press mode button and keep it pressed. Turn the device on. Release the mode button after the segment test ( ) finished. The first parameter “P.OFF“ is displayed.
PAGE 7
H55.0.31.6C-04 Operating Manual GDH 200-14 _____________________________________________________ page 7 of 8 _____________________________________________________________________________ 12 Adjusting of the instrument To adjust the instruments according to your needs proceed like follows: Switch instrument off. Press zero button and keep it pressed. Turn the device on. Release the mode button after the segment test ( ) finished. The first parameter “SCL“ is displayed.
PAGE 8
H55.0.31.6C-04 Operating Manual GDH 200-14 _____________________________________________________ page 8 of 8 _____________________________________________________________________________ 15 Specification Measuring range air pressure: 0 ... 11000 mbar abs., resolution 1 mbar 0 ... 11.000 bar abs., resolution 0.001 bar 0 ... 8250 mmHg abs., resolution 1 mmHg 0 ... 160.00 PSI abs., resolution 0.02 PSI Measuring media: non corrosive gases Max. overload: 13 bar abs. Accuracy: (±1 digit) +/- 3 mbar or +/- 0.