H55.0.01.6C-06 Operating Manual Precision Barometer from Version 1.5 GTD 1100 WEEE-Reg.-Nr. DE 93889386 GREISINGER electronic GmbH D - 93128 Regenstauf, Hans-Sachs-Straße 26 +49 (0) 9402 / 9383-0 +49 (0) 9402 / 9383-33 info@greisinger.
H55.0.01.6C-06 Operating Manual GTD 1100 _____________________________________________________ page 2 of 8 _____________________________________________________________________________ Content 1 INTENDED USE..........................................................................................................................................2 2 GENERAL ADVICE ...................................................................................................................................
H55.0.01.6C-06 Operating Manual GTD 1100 _____________________________________________________ page 3 of 8 _____________________________________________________________________________ 4 Safety instructions This device has been designed and tested in accordance to the safety regulations for electronic devices. However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures and special safety advises given in this manual will be adhered to when using it. 1.
H55.0.01.
H55.0.01.6C-06 Operating Manual GTD 1100 _____________________________________________________ page 5 of 8 _____________________________________________________________________________ It has to be considered that not only changes in altitude but also changes in the weather have influence to the altitude display. To correct the weather influence the displayed altitude can be corrected by the keys. To do so press the keys “up“ and “down“ ( ) simultaneously, „Corr„ will flash in the display.
H55.0.01.6C-06 Operating Manual GTD 1100 _____________________________________________________ page 6 of 8 _____________________________________________________________________________ Press mode button and keep it pressed. Turn the device on. Release the mode button after the segment test ( ) finished. The first parameter “P.OFF“ is displayed. If a parameter should be changed press key up or down ( parameter will be shown and can be changed via up/down keys.
H55.0.01.6C-06 Operating Manual GTD 1100 _____________________________________________________ page 7 of 8 _____________________________________________________________________________ 12 Adjusting of the instrument To adjust the instruments according to your needs proceed like follows: Switch instrument off. Press zero button and keep it pressed. Turn the device on. Release the mode button after the segment test ( ) finished. The first parameter “SCL” is displayed.
H55.0.01.6C-06 Operating Manual GTD 1100 _____________________________________________________ page 8 of 8 _____________________________________________________________________________ 15 Specification Meas. range Abs. Pressure 300,0 ... 1100,0 mbar abs., Temperature Altitude: Accuracy: (±1 digit) (at nominal temperature = 25°C) Max.