User manual

H72.0.01.6C-02 Operating Manual GMH 3431 page 6 of 14
_____________________________________________________ _____________________________________________________________________________
4.4 Pop-up clip
Handling:
‐ Pull at label “open” in order to swing open the pop-up clip.
‐ Pull at label “open” again to swing open the pop-up clip further.
Pop-up clip closed
Pop-up clip at position 90°
Pop-up clip at position 180°
Function:
‐ The device with a closed pop-up clip can be plainly laid onto a table or attached to a belt, etc.
‐ The device with pop-up clip at position 90° can be set up on a table, etc.
‐ The device with pop-up clip at position 180° can be suspended from a screw or the magnetic holder
GMH 1300.

Deviceattachedtoabelt



Devicesetuponatable

Devicesuspendedfrom
magneticholder
GMH1300
5 Start Operation
Turn device on via key.
After segment test the device displays some information on its configuration:
if cell correction scale was changed (cell correction scale unequal 1.000)
(see chapter 10 Automatic adjustment/calibration of cell correction)
if zero point or slope correction is active
(see chapter 9 Adjustment of temperature input)
After that the device is ready for measuring.