User manual

ManualsBrandsGREISINGER ManualsAlarm Systems (fire, gas, water)Water leak detector incl. magnetic check valve, incl. external sensor mains-powered

S07.0.1Y.6C-04

GHM Messtechnik GmbH • Standort Greisinger

Hans-Sachs-Str. 26 • D-93128 Regenstauf

 +49 (0) 9402 / 9383-0  +49 (0) 9402 / 9383-33  info@greisinger.de

Operating Manual

GEWAS 181 A - ..."

WEEE-Reg.-Nr. DE93889386

Alarm- and protection device

Leak-water detector

Summary of content (6 pages)

PAGE 1
S07.0.1Y.6C-04 Alarm- and protection device Leak-water detector Operating Manual GEWAS 181 A - ..." WEEE-Reg.-Nr. DE93889386 GHM Messtechnik GmbH • Standort Greisinger Hans-Sachs-Str. 26 • D-93128 Regenstauf  +49 (0) 9402 / 9383-0  +49 (0) 9402 / 9383-33  info@greisinger.
PAGE 2
S07.0.1Y.6C-04 Operating Manual GEWAS 181 A - 1/2" / ... - 3/4" / ... - 1" page 2 of 6 Index 1 2 3 4 INTENDED USE ......................................................................................................................................................2 GENERAL NOTE ....................................................................................................................................................2 SCOPE OF SUPPLY ...............................................................
PAGE 3
S07.0.1Y.6C-04 4.2 Operating Manual GEWAS 181 A - 1/2" / ... - 3/4" / ... - 1" page 3 of 6 Safety requirements This device has been designed and tested in accordance with the safety regulations for electronic devices. However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures and special safety advises given in this manual will be adhered to when using the device. 5 1.
PAGE 4
S07.0.1Y.6C-04 6 6.1 Operating Manual GEWAS 181 A - 1/2" / ... - 3/4" / ... - 1" page 4 of 6 Installation and commissioning Installation of the solenoid valve - Lock water feed lines. Screw the valve into the water connection respectively to the pipe. Use suitable sealing! Check leak tightness by turning on the water supply. In case of leakage check sealing areas and if installation was carried out correctly. In case of doubt install once again.
PAGE 5
S07.0.1Y.6C-04 9 Operating Manual GEWAS 181 A - 1/2" / ... - 3/4" / ... - 1" page 5 of 6 What to do in case of alarm Turn off the possibly connected device and the GEWAS control unit (POWER to „0“). Seek and eliminate error causes. Possible error causes: - A water film is located at the water sensor. - The contacts of the water sensor are bypassed (e.g. via a metal surface) - The water sensor has been disconnected or is defective.
PAGE 6
S07.0.1Y.6C-04 Operating Manual GEWAS 181 A - 1/2" / ... - 3/4" / ... - 1" page 6 of 6 11 Specification Power supply: Power consumption: Control output: Switching voltage: Switching current: Solenoid valve: Working pressure: max. flow rate: Operating voltage: Working temperature: Dimension: control unit: solenoid valve GMV ½" L: GMV ¾": GMV 1": EMC: 220/240V, 50/60Hz (control unit) approx. 2.5 W (control unit, approx. 6W incl.