User manual

S39.0.02.6C-03 page 1 of 4

Instruction manual

ALSCHU 480P

1 Specifications

Power supply: 220/240V 50/60Hz (controlling device)

Power consumption: approx. 1 Watt

Control output: potentialfree break contact / normally open contact carried outward via dou-

ble pole cable

Type of Voltage AC DC

Switching voltage:

max. 250 VAC max. 120 VDC

Switching current:

max. 10 A AC (resistive load) max. 2 A DC (resistive load)

Breaking capacity:

max. 2400 VA max. 240 W

Dimensions: Controlling device: 110 x 65 x 45 mm (L x W x H)

EMC: The device corresponds to the essential protection ratings established in

the Regulations of the Council for the Approximation of Legislation for the

member countries regarding electromagnetic compatibility (89/336 EWG).

2 Disposal instructions

The device may not be disposed in the regular domestic waste.

Send the device directly to us (sufficiently stamped), if it should be disposed. We will dispose the device

appropriate and environmental friendly.

3 Operating advices and service notes

1. For a durable and correct function you have to check the function in certain time lags, like every safety

device. For this the device has to be set to alarm by raising the sensors not less than once a month.

2. The device has to be treated carefully and has to be used corresponding to the preceding specifica-

tions (do not throw, do not let it dash against something, etc.).

3. The device may only be used in dry rooms.

GREISINGER electronic GmbH

D - 93128 Regenstauf, Hans-Sachs-Straße 26

Phone.: +49 9402 / 9383-0, Fax: +49 9402 / 9383-33, www.greisinger.de

PAGE 1
S39.0.02.6C-03 page 1 of 4 Instruction manual ALSCHU 480P 1 Specifications Power supply: Power consumption: Control output: Type of Voltage 220/240V 50/60Hz (controlling device) approx. 1 Watt potentialfree break contact / normally open contact carried outward via double pole cable AC DC Switching voltage: Switching current: Breaking capacity: max. 250 VAC max. 10 A AC (resistive load) max. 2400 VA Dimensions: EMC: max. 120 VDC max. 2 A DC (resistive load) max.
PAGE 2
S39.0.02.6C-03 page 2 of 4 4 Installation and initiation (may only be effected through adequate skilled personnel!) 1. Turn the power switch of the alarm device (ALSCHU 480P) to the off-position and turn the selector to setting "II" (switching output open). 2. Hang up the alarm device via clamp to the favoured place (possibly choose an inconspicuous, but easily reachable arrangement; but pay attention to enough sonic radiation of the built in alarm transmitter!). The device may only be used in dry rooms.
PAGE 3
S39.0.02.6C-03 page 3 of 4 6 Safety regulations This device was designed and tested considering the safety regulations for electronic measuring devices. Faultless operation and reliability in operation of the measuring device can only be assured if the general safety precautions as well as the device-specific security advices in this users manual are considered at the usage of this device. 1.
PAGE 4
S39.0.02.