H63.0.xx.xB-01 Ergänzungsanleitung Heu- und Strohfeuchte Set ab Version 1.8 BaleCheck 200 mit GMH 38 WEEE-Reg.-Nr. DE 93889386 GREISINGER electronic GmbH D - 93128 Regenstauf, Hans-Sachs-Straße 26 +49 (0) 9402 / 9383-0 +49 (0) 9402 / 9383-33 info@greisinger.
H60.0.xx.xB-01 Ergänzungsanleitung BaleCheck 200 für GMH 38 _____________________________________________________ Seite 2 von 4 _____________________________________________________________________________ 1 Allgemeiner Hinweis Lesen Sie dieses Dokument aufmerksam durch und machen Sie sich mit der Bedienung des Gerätes vertraut, bevor Sie es einsetzen.
H60.0.xx.xB-01 Ergänzungsanleitung BaleCheck 200 für GMH 38 _____________________________________________________ Seite 3 von 4 _____________________________________________________________________________ 4 Bedienung 4.1 Inbetriebnahme Gerät mit der Taste „on/off“ einschalten. Nach dem Segmenttest ist das Gerät bereit zur Messung. 4.2 Kennlinienauswahl Kennlinienauswahl: durch kurzes Drücken der Tasten werden.
H60.0.xx.xB-01 Ergänzungsanleitung BaleCheck 200 für GMH 38 _____________________________________________________ Seite 4 von 4 _____________________________________________________________________________ 5.4 Hinweise zur Messung Die Messwerte Für die Lagerfähigkeit und die Bewertung der Qualität und Verwendungszweck ist die BaleCheckMessung eine wichtige Entscheidungshilfe – neben der Beurteilung durch Geruch (muffig?) – Konsistenz (Staub…) und Aussehen (Farbe, Verunreinigungen).
H60.0.xx.xC-01 Operating Manual Appendix Hay and straw humidity measuring device as of version 1.8 BaleCheck 200 with GMH 38 WEEE-Reg.-Nr. DE 93889386 GREISINGER electronic GmbH D - 93128 Regenstauf, Hans-Sachs-Straße 26 +49 (0) 9402 / 9383-0 +49 (0) 9402 / 9383-33 info@greisinger.
H60.0.xx.xC-01 Operating Manual Appendix BaleCheck 200 with GMH 38 _____________________________________________________ page 2 of 4 _____________________________________________________________________________ 1 General Note Read this document carefully and get used to the operation of the device before you use it. Keep this document within easy reach near the device for consulting in case of doubt.
H60.0.xx.xC-01 Operating Manual Appendix BaleCheck 200 with GMH 38 _____________________________________________________ page 3 of 4 _____________________________________________________________________________ 4 Handling 4.1 Start of operation Switch the device on with the on/off key. After segment test the device is ready for measuring. 4.2 Selection of the characteristic curve Selection of characteristic curve: by pressing the characteristic curve can be selected.
H60.0.xx.xC-01 Operating Manual Appendix BaleCheck 200 with GMH 38 _____________________________________________________ page 4 of 4 _____________________________________________________________________________ 5.4 Measuring Practice The measuring values For storability and evaluation of quality and purpose the BaleCheck measuring is a valuable decision support – Beside other criteria like smell (mouldy?)– consistency (dust…) and look (color, dirt…).