User manual

H61.0.2X.6B-01 User’s Manual GMH 3210 page 11 of 12
12 Specification
Thermocouple: J, K, N, S or T
Probe Connection: Socket for flat pin plug, free from thermo voltage for type K
Resolution: 0,1°C or 1°C 0,1°F or 1°F for types J, K, N, T
1°C 1°F for type S
Meas. Ranges: 0,1°C 1°C 0.1F 1°F
Type K: (NiCr-Ni) -65,0... +300,0 °C -220... +1372 °C -85,0... +572,0 °F -364... +2500 °F
Type J: (Fe-CuNi) -50,0... +225,0 °C -140... +950 °C -58,0... +437,0 °F -220... +1742 °F
Type T: (Cu-CuNi) -65,0... +250,0 °C -220... +400 °C -85,0... +482,0 °F -364... +752 °F
Type N: (NiCrSi-NiSi) -100,0... +380,0 °C -200... +1300 °C -148,0... +716,0 °F -328... +2372 °F
Type S: (Pt10Rh-Pt) - -50... +1768 °C - -58... +3214 °F
Accuracy: (for thermocouples DIN EN 60584) ±1 digit (at nominal temperature)
Range 0,1 °C/°F Range 1 °C/°F
Type K: ±0,03% of m.v. ±0,05%FS ±0,08% of m.v.±0,1%FS
Type J: ±0,03% of m.v.±0,08%FS ±0,08% of m.v.±0,1%FS
Type T: ±0,03% of m.v.±0,1%FS ±1°C (T > -100°C),
±1°C ±1Digit (T < -100°C)
Type N: ±0,03% of m.v.±0,05%FS ±0,08% of m.v.±0,1%FS (T > -100°C) ±1°C,
±0,1%FS (T < -100°C)
Type S: - ±0,1% of m.v.±0,1%FS (T > 200°C),
±1°C ±0.1%FS (T<200°C)
Temperature drift 0,01 %/K
Point of Comparison ±0,3 °C
Nominal temperature 25 °C
Display: 2 four digit LCDs (12.4mm high and 7 mm high) for measuring values, and for min/
max memories, hold function, etc. as well as additional functional arrows.
Pushbuttons: 6 membrane keys
Output: 3.5 mm audio plug, stereo
Output function: selectable as serial interface or analog output
Interface: Serial interface (3.5mm jack) can be connected to USB or RS232 interface of a PC
via electrically isolated interface adapter USB3100, USB 3100 N, GRS3100 or
GRS3105 (see accessories).
Analog output: 0 ... 1 Volt, freely scaleable (resolution 12 bit)
Power supply: 9V battery, type: IEC 6F22 (included in scope of supply)
as well as additional d.c. connector (diameter of internal pin 1.9 mm) for external
10.5-12V direct voltage supply. (suitable power supply: GNG 10 / 3000)
Power consumption: approx. 260µA when output switched off
approx. 400µA when output is serial interface (at 1 reading per second)
approx. 500µA when output is analogue output (without load)
Low battery warning: ' bAt '
Working conditions: -20 ... +50 °C, 0 ... 95 %RH (not condensing)
Storage temperature: -20 ... +70 °C
Housing: impact-resistant ABS, membrane keyboard, transparent panel, Front side IP65
Dimensions: 142 x 71 x 26 mm (L x W x D)
Weight: approx. 155 g
EMC: The device corresponds to the essential protection ratings established in the
Regulations of the Council for the Approximation of Legislation for the member
countries regarding electromagnetic compatibility (2004/108/EG).
Additional fault: <1%
_
+