User manual

ManualsBrandsGREISINGER ManualsTemperature GaugesThermometer Mess-Set: TEMP 2 -200 up to +850 °C Sensor type Pt100

H49.0.02.6C-07 User’s Guide GMH 3750 page 3 of 16

_____________________________________________________ _____________________________________________________________________________

1 General Note

Read this document carefully and get used to the operation of the device before you use it. Keep this

document within easy reach near the device for consulting in case of doubt.

Mounting, start-up, operating, maintenance and removing from operation must be done by qualified, specially

trained staff that have carefully read and understood this manual before starting any work.

The manufacturer will assume no liability or warranty in case of usage for other purpose than the intended

one, ignoring this manual, operating by unqualified staff as well as unauthorized modifications to the device.

The manufacturer is not liable for any costs or damages incurred at the user or third parties because of the

usage or application of this device, in particular in case of improper use of the device, misuse or malfunction

of the connection or of the device.

2 Safety

2.1 Intended Use

The GMH 3750 is a precision thermometer for the measurement of the temperature with exchangeable 4-

wire Pt100 temperature sensors. With high resolution and precision temperature values can be measured

from -200 to 850 °C.

The device is to be protected against wetness and soiling and has to be stored and operated only within the

permissible environmental conditions and connection data (see “Specification”).

2.2 Safety signs and symbols

Warnings are labelled in this document with the followings signs:

DANGER

Caution! This symbol warns of imminent danger, death, serious

injuries and significant damage to property at non-

observance.



Attention! This symbol warns of possible dangers or dangerous

situations which can provoke damage to the device or

environment at non-observance.

Note! This symbol point out processes which can indirectly influence

operation or provoke unforeseen reactions at non-observance.

2.3 Safety guidelines

This device has been designed and tested in accordance with the safety regulations for electronic devices.

However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures

and special safety advises given in this manual will be adhered to when using the device.

1. Trouble-free operation and reliability of the device can only be guaranteed if the device is not subjected to

any other climatic conditions than those stated under "Specification".

If the device is transported from a cold to a warm environment condensation may cause in a failure of the

function. In such a case make sure the device temperature has adjusted to the ambient temperature

before trying a new start-up.

2. If there is a risk whatsoever involved in running it, the device has to be switched off

immediately and to be marked accordingly to avoid re-starting.

Operator safety may be a risk if:

- there is visible damage to the device

- the device is not working as specified

- the device has been stored under unsuitable conditions for a longer time.

In case of doubt, please return device to manufacturer for repair or maintenance.

_DANGER