Yes you ree lo Se PEG EPP E PLOP EHR LE PLE REL HEED EEN Dresser
Part Identification Hardware identification Assembly Steps Fran gals Espalier Safety Warranty 5-20 20-24 26-28 28-30 Hn bo. & Phillips Screwdriver Yip Shown Ac teal Size Harvard Not actual size @8 Skip the power trip, This tine.
¥ while not all parts are labeled, some of the parts will eve a level or an inked letter on the edge 2 help distinguish similar parts from each other, Use this pant identification to help identify similar parts, A RIGHT END) 0733 | DRAWER BOTTOM (8) Kf RIGHT DRAWER FRONT (3) BO LEFTWARD) E BOTTOM L LEFT DRAWER FRONT (3) CL UPRIGHT (1) HALFBACK Mo ORA WEE FRONT MOLDING (8) 2 TOR RIGHT FRONT LEG {1 DRAWER BRACE (8) ME? | [Hidden part using recycled D30 | RIGHT DRAWER SIDE [6] H LEFT FRONT LEG (1) materiel, Co
¥ Screws are shown actual size. You may receive extra hardware with your unit.
Assemble your unit on 2 carpeted floor or on the empty carton to avoid scratching your unit or the Ron Push ten HIDDEN CAMS (IF) into the ENDS {A and 8), UPRIGHT (C0), ard BOTTOM (EB). Then, insert the metal end of a CAM DOWEL (2F) undo each HIDDEN CAM, Insert the mete! end of the LAM BOWEL info the HIDDEN CAM.
3 Push twelve HIDDEN CAMS [IF] into the ENDS (A and Bl and DRAWER BRACES (MEAL Phi sro in the HIDDEN CAM rest point forward the hide fry the sce of the board, Arrow Page &
1 — webs CAM SCREWS (BF) into the FRONT LEGS (G anc H) and DRAWER FRONTS {K and L.
¥ riser sik WOOD DOWELS [15F) into the holes in the LEGS (CG and 1). x Fasten the RIGHT END (A} to the RIGHT FRONT LEG [3]. Tighten , shew HIDER CAMS. 1 & ¥ Fasten the BACK LEG (1) to the RIGHT END [A], Use three BLACK 2-4” FLAT HEAD SCREWS (268). < i NOTE: Use the smaller holes in the BACK LEG.
insert sik WOOD DOWELS [15F) into the holes in the LEGS (H and 1). Fasten the LEFT END (B) to the LEFT FRONT LEG (H]. Tighten three HIDDEN CAME, Fasten the BACK LEG (I to the LEFT END (8). Use three BLACK FLAT HEAD SCREWS (268). NOTE: Use the smaller holes in the BACK LEG. NOTE: Bo sure the WOOD DOWELS in the LEGS insert into the holes in the LEFT END.
¥ Fasten the UNIVERSAL CABINET RAILS” (35AA1 to the ENDS (A and B] and UPRIGHT [C).
0 z Open the FURNITURE TIPPING RESTRAINT KIT (87) and fasten the SAFETY STRAP tw the TOP (D2). Use the provided SH { LE BLACK 9/16" LARGE HEAD SCREW. Nd 1 NOTE: Position the SAFETY STRAP exactly as shown, BLACK 9/16" LARGE HEAL SCREW {1 used for the SAFETY STRAP) it Fasten the LEFT ERD (8) and UPRIGHT {C) to the TOP (D2) Tighten four HIDDEN CAMS. g Safety strap om IN Do not stand the obit upright without the BACK fastened. The unit may collapse. 4h Caution Tighten Oo Risk of damage or nary.
3 Faster the BOTTOM (E] to the LEFT END (B), Tighten two HIDDEN CAME, z Fasten the BOTTOM (E) to the UPRIGHT [C). Use two BLACK 15/16" FLAT HEAD SCREWS {T1358 it Fasten the RIGHT END (A) to the TOP [02) and BOTTOM (E).
Carefully turn your unit over onto its front edges. Fourfold the BACK {F} and lay #t over your unit, A perforation in the BACK {F) hay bean provided for access to the SAFETY STRAP Punch out the perforation and push the SAFETY STRAP through the hale, Make equal margin along the top and bottom edges of the BACK (F) Then, make equal margins along the side edges of the BACK (8). Push on opposite timers of your unit if needed to make it suasion.
Fasten the FOOT BRACKET (BE] to the BOTTOM (E} Use three BLACK 9/15" LARGE HEAD SCREWS (18) Slide the FEET (J} onto the FOOT BRACKET (BE). Tighten the FEET with two BLACK 9/16" LARGE HEAD SCREWS [15). Firmly push the FOOT CAP (BE) root the FEET UU) it If you're doing this to 2 help a friend, font leave without 3 bite.
x Fasten a DRAWER FRONT MOLDING (M] to sate RAWER FRONT {K and L).
© 1 Tha tabs should insert freely 2 With the paler of your hao, ind the sloes. Gently lt the tap the DRAWER BOTTOM DRAWER SIDES side to side dower into the groove. wil the tabs slip into the dots. Ba sure the DRAWER BOTTOM inserts int the Sg DRAWER FRONT groves § Insert the DRAWER SIDES (O30 and D3 strangle into 1 § Slice the DRAWER BOTTOM (D733) inks the grooves the slot at each end of the RIGHT DRAWER FRONT {K).
¥ Insert a SLIDE CAM [10A} into the DRAWER SIDES (D30 snd D31. ¥ Fasten a DRAWER RIGHT (38AC) to the RIGHT DRAWER SIDE {D30) and a DRAWER LEFT (35AD) to the LEFT DRAWER SIDE [D31). Use four GOLD 5/18" FLAT HEAD SCREWS (3%) through holes 1 and #2. NOTE: The screw head in the CAM must be visible through the slotted hole in the SUED. NOTE: The glides are not intended to rotate. Fasten a PULL (170K) to the RIGHT DRAWER FRONT (K).
1 Carefully stand your unit upright In its final location. We recommend using the SAFETY STRAP for added stability. ¥ NOTE: Do not turn the SAFETY DRYWALL ANCHOR into a wall stud, i you prefer to fasten the SAFETY STRAP to a wall stud, gn to your local hardware store for proper hardware, ¥ INSTALLATION INSTRUCTIONS: 1 Insert the SAFETY DRYWALL ANCHOR through the WASHER and the end of the SAFETY STRAP. 2.
1 To insert the drawers Into your unit, Hip the front of the drawer down and drop the glides on the drawer behind the glides on the unit. Lift the front of the drawer up and slide i into the unit, x NOTE: Be sure the label pn the LEFT DRAWER SIDE is In one of the UPPER drawers. WARNING Children have died from furniture tip over. To reduce the risk of furniture tip over: « ALWAYS install tip over restraint provided. » NEVER put a TV on this product.
1 To rake adjustments to the drawers, loosen SCREW £2 in the DUDES a 1/4 tum, then tum the CAM clockwise or counterclockwise. Notice how the drawer raises or lowers as you turn the CAM, The higher the screw in the oblong hole, the higher your drawer front will be. The lower the screw, the lower the drawer front.
