Installation & Assembly

Hardware:

Component:

Bolt x4

Allen Wrench x1

Table Top x1

Table Base x1

Flat Washer x4

4.Please do not throw away any of the packaging or instructions until you have checked all the components and

hardware and the furniture is fully assembled.

5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the

components from time to time, so please save the tools that have been provided.

6.Please keep all pieces out of reach of small children.

TABLE

Thank you for purchasing the TABLE！

Before you st

art, here is some helpful advice:

1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step

instructions.

2.Owing to the size and weight of the table, we recommend that it is assembled by two adults, on a carpeted or

padded area, in the room that it is intended for. Approximate assembly time: 15 minutes.

3.Please do not use any tools other than those provided or recommended in these instructions.

Page 1 of 2

PAGE 1
TABLE Thank you for purchasing the TABLE！ Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions. 2.Owing to the size and weight of the table, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for. Approximate assembly time: 15 minutes. 3.Please do not use any tools other than those provided or recommended in these instructions. 4.
PAGE 2
TABLE STEP 1: Please put the Table Top (1) upside down on a carpeted or padded surface. Attach Table Base (2) into the bottom of Top (1) by using Bolts (A) and Flat Washers (B) as shown. Use Allen Wrench (C) to tighten the Bolts (A) clockwise until secure. 2 2 1 Ax4 1 Bx4 Cx1 Hardware & Tool required STEP 2: Carefully turn over the table. Assembly is completed.