Installation & Assembly
ASSEMBLY AND INSTALLATION
NOTE
: Should any difficulty be experienced, please consult a qualified
electrician before installing.
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT
OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
WARNING
:
CHAIN
ADJUSTABLE CHAIN
ADJUSTABLE CHAIN
LOOP
TOP NUT
CANOPY
TOP LOOP
NIPPLE
HEX NUT-1
NIPPLE
GROUND WIRE
BLACK WIRE
GREEN SCREW
SPRING WASHER
MOUNTING SCREW
WIRE CONNECTOR
HEX NUT-1
WHITE WIRE
OPTION B
OPTION A
Installation steps
:
1. Turn off the electricity at the Fuse
or Circuit Breaker before
installation.
2. Attach the Cross Bar to the
Outlet Box by using 2PCS
of Mounting Screws upwards.
3. Attached the Small cover
to the Nipple and fix with the Loop.
4.Two options can be taken for the
Socket Tube:
Option A: use the Glass Tubes:
install bulbs.
(Bulbs are not included, please do not
exceed the maximum capacity which is
recommended on the Candle Cover.)
carefully attached the Glass
Tube to the Socket
Option B: use the Iron Tubes:
Attached the Iron Tube to the Sockets
and install bulbs.
5. Straight the Central Tube to be vertical and then fixing the Small Screw.
6.Choose a certain length of the Chain you need, and weave the Fixture Wire and the Ground Wire
through the Chain links, then attached one of the Adjustable Loops to the Top Loop and the other
one to the Loop.
7.Thread the fixture wire and the Ground Wire through the Top Nut, Top Loop, Adjustable Loop,
Canopy, Nipple and the Cross Bar in order.
8. Make wire connections with Wire Connectors:.
----Connect the Wire (W/ marking) from the light to the Black Wire from the Outlet Box.
----Connect the Wire (W/O marking) from the light to the White Wire from the Outlet Box.
----Attached the Ground Wire and House Ground Wire to the Cross Bar with a Green Screw.
Carefully tuck wires back into the Outlet Box.
9.Attached the Canopy to the Cross Bar by inserting the Nipple , then secure with the Top Loop and Top Nut.
10. Turn on the power at Fuse or Circuit Box and enjoy your new fixture.
INSTRUCTIONS