Installation manual Dimensions DIO” HT LY Bulb Typeset bulb not included Lamp Frame Weightless) sd Total Thank you for choosing our product(s). Our Company Is actively involved in every step of the production. Our product(s) are designed to be utilized for every application that graces your hog ov business. We. pride ourselves in providing the most prompt and courtesy service to all of the valued customers. Please find the enclosed detailed instruction and read carefully for proper installation.
[TRA SAFETY Warning: MARE SURE THE ELECTRICITY 10 THE WIRES WORKING. 0 § IER REMOVING 'FHE TURNING OFF THE CIRCUIT BREAKER. CAUTION =~ Be lore assembling {he lighting Mixture, please read all restrictions carefully ALL Streamer & o wl components are fragile, please handle with care Required supply circuit o 110 — 130V/60Hx = Labeled wives spe “LY for Dive wive, “N7 for sleuths wire, “EY for ground wire.
D10” H7” L3 D10” H7” L3 Step 1 Please use the parts list to ensure you are not part | picture | Description |Qty| Check list fad ached with missing any parts A BIr@ | lamp body 1502.52 | 66 PARTS LIST part picture Description | Qty| Check list B | «frp *Apes 36 ZA Junction box 1 Cc *Ipc 34 7B 4"Crossbar |6"Metal ceiling plate Nut cap 2 Power Cord 12 IB | ALY | Poe con Coachload Law beauty 1 P2 ZF Finial 1 P3 | bracket | 3 P4 Socket |2.
DLO™ HET L3 Step 2 Canopy installation instructions Hot wire “N” = Neutral wire E Ground wire JOY HF” L3 Important: This product must be installed in accordance with the local installation codes by a person familiar with construction and operation of this product and the hazards involved. 1. Black wire from ceiling(junction box) attaches to "L"wire from the fixture. 2. White wire from ceiling((junction box) attaches to "N"wire from the fixture. 3.
DIO” HTT Lo DIO” HTT OLS Step 3 Frame Assembly Diagram Frame Assembly Instructions Installation: Please read all instructions carefully. Before you proceed to install, make sure. that the power supply is turned off and remains off until installation is complete. or 5 Please note that each part has been assigned a number. Please proceed in a numerical order, 02—~ J = = 1.Fix the crossbar (01) on the installation 4” [1 l 2.Screw the iron bracket (04) on the lamp body (02) pressing holes with M3*12 screws. 3.
CLOY HY 1.3 Step 4 Crystal Dressing Instructions 1. Hang crystal "B” "C” 2. "A”part attached to the lamp body. Dio” HY” L3 Crystal Dressing Diagram When dressing the chandelier with the crystals please remember &J to wear either rubber or cotton gloves. So as to prevent any damage or smudging on the crystals.
JOY HF” L3 Congratulations ! You are now done installing your fixture Sit back and admire each crystal as it will become the statement piece for your room/house Thank you. DIO™ H7” L3 Cleaning and Maintenance of Chandelier Frame The finish on our chandelier frames and fixture frames is protected by a durable coating of lacquer. To clean, use a clean, soft, dry cloth.Do not use any metal polishes, cleaners, abrasives or any substance which could remove the protective finish.
DIO” HY” L3 Warranty The finish and frame of your new chandelier or fixture are warranted for a period of from the date of purchase. Our company will at its option, repair or replace any frame that has a defect in the material or workmanship during the warranty period. All crystals are guaranteed for their original quality during the life of the chandelier. Breakage is not covered by this warranty. To meek a claim under this warranty, contact our customer service department at the address and phone number.