Owner Manual

Step 16
å
IMPORTANT: You will need someone's help in this step.
å
Fasten the TOP (D) to the ENDS (A and B). Use ten
BLACK 9/16" LARGE HEAD SCREWS (1S) through the
LIFT TABLE MECHANISMS (74M) and into the holes in
the ENDS.
å
NOTE: Be careful when lining up the holes in the
MECHANISMS with the holes in the ENDS as to not
damage any parts.
Page 20
74M
74M
B
A
These four holes
must be here.
BLACK 9/16" LARGE HEAD SCREW
(10 used in this step)
1S
1S
NOTE: Be sure to use
the exact holes shown
for the SCREWS.
D