Installation & Assembly

Step 3
Open the carton and place all the parts onto a clean, non-marring surface.
Attach Footrests(D) to Leg(C) using Bolts(①) and Washers(②) with Allen Key(③) as
shown in the picture.
Do not fully tighten the Bolts.
Step 2
Attach Leg(B) to Footrests(D) using Bolts(①) and Washers(②) with Allen Key(③).
Do not fully tighten the Bolts.
Attach Seat(A) to Leg(B) and Leg(C) using Bolts(①) and Washers(②) with Allen Key(③)
as the shown above.
Do not fully tighten the Bolts.
ATTENTION: Occasionally some of the PE Wicker shifts and covers the mounting
positions preventing easy assembly. The PE wicker should never be cut, but moved
away from the mounting positions.
Step 1
3 OF 4