Operator's Manual

ETD-100 OPERATOR’S MANUAL
22
To perform a sample test:
1. Navigate the device touchscreen to show the INSERT SWAB Screen.
2. Once the INSERT SWAB Screen is displayed, insert the Swab into the Sample Trap Holder. Ensure the
Swab position is as illustrated with the round edges entering the Sample Trap Holder first, and the alignment
hole located on the right as per Figure 17.
Figure 17: Swab Insertion Correct Orientation
3. Press the PROCEED Button to commence the processing of a sample Swab.
4. The device will now begin testing the Swab sample. Testing takes up to 1 minute. A SCANNING on screen
message is displayed whilst the sample is being tested (processed).
Figure 18: Scanning Screen