Operator's Manual

ETD-100 OPERATOR’S MANUAL
34
7.2 Packing the Device for Transport
To prevent damage during transit the device must be returned to its original shipping package.
Ensure the following steps are completed to prepare the device for shipping:
1. All steps from Section 7.1 have been completed.
2. Place the device into the shipping package referring to the figure below.
Figure 34: Device Original Packaging
7.3 Packing the Reagent Cartridge for Transport
To prevent damage during transit the Reagent Cartridge if being returned to the manufacturer or if being shipped by a
third party should be packed in its original shipping package.
Ensure the following steps are completed to prepare the Reagent Cartridge for shipping:
a. Install the plastic bag onto the Reagent Cartridge and seal with tape.
b. Install the cardboard end supports onto the Reagent Cartridge.
c. Insert the Reagent Cartridge with the end supports into the transport box.
d. Install the cardboard side packing supports.
e. Close and seal the lid.
Figure 35: Reagent Cartridge Original Packaging