Operator's Manual

ETD-100 OPERATOR’S MANUAL
42
Figure 42: Sample Management Files
9.2.2.1 Saving A Sample Scan
The User can select and save specific scans in the sample management screen. To save scans:
1. Select scans that need to be saved by pressing the circle to the right of the desired scan so that the circle
turns blue . Alternatively, the User can press the button to select all scans on the current page.
Pressing twice in succession will deselect all scans on the current page.
2. Once desired scans have been selected, press the Save button to save the selected scans.
Ensure a USB flash drive is inserted before pressing the Save button.
3. A save progress pop up will appear to inform the User when the save has been completed.
Figure 43: Save Scan Progress Bar
9.2.2.2 Deleting A Sample Scan
To Delete Scans:
1. Select scans that can be deleted by pressing the circle to the right of the desired scan so that the circle turns
blue . Alternatively, the User can press the button.
2. Once desired scans have been selected, press the DELETE button .
3. The User will be asked to confirm deletion, as the operation cannot be undone. Press the PROCEED button
to continue, or the CANCEL button to abort.
4. A delete progress pop-up will appear to inform the User when the files have been deleted.