Operator's Manual

ETD-100 OPERATOR’S MANUAL
47
6. Note: For Wi-Fi connection, both the device and PC should be connected to the same network.
7. For LAN or Ethernet connectivity, connect the device directly to a PC’s Ethernet port configured for DHCP (a
typical default configuration).
8. Use the NETWORK PARAMATERS Screen to configure the device.
9. Press the EDIT button.
10. Parameters can be configured with DHCP off.
Figure 54: Network Parameters
11. Enter the IP address 169.254.1.1
(DHCP: Disabled IP: 169.254.1.1)
12. Enter the Subnet Mask 255.255.0.0
13. Enter the Default Gateway 169.254.1.1
14. Enter the DNS Server 169.254.1.1
15. Press SAVE
16. Double click on the GreyScanFrontend.exe file
17. Enter the IP address 169.254.1.1 into the IP address field dialogue box (illustrated below) and press OK.
Figure 55: Remote Frontend IP address field (LAN)