Operator's Manual

ETD-100 OPERATOR’S MANUAL
50
4. If the User does not wish to connect the device to the Internet, the Timezone, Time and Date can be set by
turning off the Set Time Automatically button (swipe left). Once OFF, the three fields can be manually
configured as illustrated below:
Figure 60: Timezone Screen
5. Press SAVE and the device will restart the software.
6. If the device is transported from one location to another and time is not reset or the time zone has not been
updated, the scan file name will reference the UTC and the offset to UTC (reflecting the time zone in which the
device is located).
9.7 User Access Overview
Software access levels will differ depending on permissions assigned to each User login. A breakdown of User
software function access for Supervisors and Operators is detailed in Table 5.
Note: The Production login will only be used by Service technicians.
Permission
Operator1 (Level 3)
Operator2 (Level 3)
Laborator y (Level 2)
Admin
(Level
Z)
Production
Display devices
%
DU
DU
DU
DU
Run sample
Y
Y
Y
Y
Y
Show electropherogram
Y
Y
Y
Y
Y
Export last/saved report
Y
Y
Y
Y
Y
Export last/saved scan data
Y
Y
Y
Y
Y
Flush
Y
Y
Y
Maintenance mode
Y
Y
Y
Erase all electropherograms
Y
Y
Y
Restart/cancel self-test
Y
Y
Y