Quick Start Manual

Page: 12 of 13
1) Wall Mount
：
a. Removethebottomscrewofthemountwithahexkey
b. Remove the mount.
c. Punch holes in the wall according to the fixed holes of
the mount and screw the mount to the wall.
d. Plug in the cable and secure FasTer A2/T2 on the
mount.
e. Lock the screws connecting the mount and FasTer
A2/T2 with a
hexkey
.
2) Support frame
：
a. Plugin
the cable and secure FasTer A2/T2 on the
support frame with screws.
b.
Use the hex key to loosen the screw, then tighten it
at the right angle.