SDS

ManualsBrandsGrid Axcents ManualsBuilding materials4' x 8' Saguaro Cedar Standard Plastic Lattice Panel

MATERIAL SAFETY DATA SHEET

Polypropylene (PP)

SECTION 1 – CHEMICAL PRODUCT AND COMPANY

Chemical Name & Synonyms : Polypropylene (PP) Copolymer

Chemical Family : Polyolefin

C.A.S. No. : 9010-79-1

Formula : -

Manufacturer’s Name : Deltco Plastics

Address : 601 Industrial Park Road

Ashland, WI 54806

Telephone No. : 715-682-9007

Fax No. : 715-682-0358

SECTION 2 – COMPOSITION / INFORMATION ON INGREDIENTS

Exposure Limits in Air

Chemical

Name

Content

(Normal)*

CAS

Number

ACGIH

TLV-TWA

ACGIH

TLV-STEL

IDLH

Polypropylene

99.25 wt%

9010-

79-1

10 mg/m3

(inhalable

fraction)

Proprietary

additives

<=0.75 wt%

Mixture

*For Different grades of PP, minor changes may be there.

SECTION 3 – HAZARDS IDENTIFICATION

Information Pertaining To Particular Dangers for Man and Environment

Negligible hazard at ambient temperature (-18

C to +50

Classification System

Product is not considered to be hazardous under normal processing conditions.

Summary of content (6 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET Polypropylene (PP) SECTION 1 – CHEMICAL PRODUCT AND COMPANY Chemical Name & Synonyms : Polypropylene (PP) Copolymer Chemical Family : Polyolefin C.A.S. No. : 9010-79-1 Formula : Manufacturer’s Name : Deltco Plastics Address : 601 Industrial Park Road Ashland, WI 54806 Telephone No. : 715-682-9007 Fax No. : 715-682-0358 SECTION 2 – COMPOSITION / INFORMATION ON INGREDIENTS Exposure Limits in Air Chemical Name Polypropylene Content (Normal)* 99.
PAGE 2
SECTION 4 - FIRST AID MEASURES GENERAL INFORMATION At room temperature the product is neither an irritant nor gives off hazardous vapors. The measures listed below apply to critical situations (Fire, incorrect process conditions). Skin contact If molten material contacts the skin, immediately flush with large amounts of water to cool the affected tissues and polymer. Do not attempt to peel the polymer from skin. Obtain immediate emergency medical attention if burn is deep or extensive.
PAGE 3
SECTION 7 – HANDLING AND STORAGE HANDLING Information for safe handling: No special requirements necessary, if handled at room temperature. Avoid spilling the product, as this might cause falls. STORAGE Requirements to be met by storerooms and containers: This product may react with strong oxidizing agents and should not be stored near such materials. Store the bags in areas protected with automatic sprinklers. Storage temperature should be below 600 C. Do not smoke.
PAGE 4
Hands Hot material: Wear heat-resistant protective gloves, clothing and face shield able to withstand the temperature of the molten product. Cold material: Not required; however, use of gloves is good industrial practice. The correct choice of protective gloves depends upon the chemicals being handled, the conditions of work and use, and the condition of the gloves (even the best chemically resistant glove will break down after repeated chemical exposures).
PAGE 5
SECTION 11 – TOXICOLOGICAL INFORMATION ACUTE TOXICITY: Primary irritant effect: - on the skin: No irritant effect. - on the eye: No irritant effect. - sensitization: No sensitizing effect known. ADDITIONAL TOXICOLOGICAL INFORMATION When used and handled according to specifications, the product does not have any harmful effects according to our experience and the information provided to us.
PAGE 6
The product and additives incorporated in it also comply with FDA: CFR Title 21.177.1520 Olefin Polymer. SECTION 16 – OTHER INFORMATION The information supplied has been based upon the current level of information available, for the purpose of specifying the requirements regarding environment, health and safety in conjunction with the product. They are not to be interpreted as a warranty for specific product characteristics.