User's Guide
Table Of Contents
- Provisioning the Smart Power Cord to ConnectSense Cloud.
- 1.1 Overview of the ConnectSense Smart Power Cord
- 1.2 Setup Steps
- 1.3 Create an Account on the ConnectSense Cloud application
- 1.4 Connecting the Smart Power Cord to the Network
- 1. Select the “+” in the top left-hand pane to ADD a Smart Power Cord to the account
- 2. Press and hold the push button for 15 seconds on the Smart Power Cord
- 3. Click Next on the screen
- 4. Now, use your host computer to scan for available networks and then change the Wi-Fi connection to the network (SoftAP on the Smart Power Cord) named “CS-CORD-XXXXX” (where XXXXX is the unique serial number for each Smart Power Cord)
- 5. Now select a Wi-Fi network that you want the Smart Power Cord to use that will allow a connection to the Internet and AWS.
- 1.5 Display Modes
- 1. Appliance Mode
- 2. Advanced Mode
- 3. Available Graphs, you can select which parameters you wish to display
- 4. Power Signature shows the real-time data
- 5. Rules for shut down of the device (power on/off) and notification via text and/or email
- 6. Sample Text message which shows the name of the cord and parameter that trigged the event, note the relay and be turned off as part of the notification.
- 7. Settings - Change the name of the Cord, the reporting frequency, or removing a device
- 8. Power Signature shows in this example – Voltage and Current
- 9. Displaying the variables about your cord
Copyright and Trademark
Copyright © 2020, Grid Connect, Inc. All rights reserved.
No part of this manual may be reproduced or transmitted in any form for any purpose other than
the purchaser's personal use, without the express written permission of Grid Connect, Inc. Grid
Connect, Inc. has made every effort to provide complete details about the product in this manual,
but makes no warranty of any kind with regard to this material, including, but not limited to, the
implied warranties of merchantability or fitness for a particular purpose. In no event shall Grid
Connect, Inc. be liable for any incidental, special, indirect or consequential damages whatsoever
included but not limited to lost profits arising out of errors or omissions in this manual or the
information contained herein.
Grid Connect, Inc. products are not designed, intended, authorized or warranted for use as
components in systems intended for surgical implant into the body, or in other applications
intended to support or sustain life, or in any other application in which the failure of a Grid
Connect, Inc. product could create a situation where personal injury, death, or severe property or
environmental damage may occur. Grid Connect, Inc. reserves the right to discontinue or make
changes to its products at any time without notice.
Grid Connect, ConnectSense, and the Grid Connect and ConnectSense logos, and combinations
thereof are registered trademarks of Grid Connect, Inc. All other product names, company names,
logos or other designations mentioned herein are trademarks of their respective owners.
Grid Connect Inc.
1630 W. Diehl Road
Naperville, IL 60563, USA
Phone: 630.245.1445
Technical Support
Phone: 630.245.1445
Fax: 630.245.1717
Web: www.gridconnect.com, www.connectsense.com