User's Manual

PB64021-01)GC9838))
DIN)Rail)Hybrid)PLC-RF)Modem))))
Product)Brief)
© gridComm Pte. Ltd. Product Brief Page 2 of 4
Figure'1'-'“Star”-Shaped'Network'
Figure'2'-'“Tree”'Structure'
Figure'3'-'“Tree'&'Mesh”'Structure
Features and Specifications
• Connects directly to Low-Voltage AC power line
• Input power supply: Options for 90VAC~ 277VAC,
50/60 Hz, 100mA
• Operating Temperature -40°C to +85°C
• Standards: CE , FCC
ü EMC: test as per EN 50065-1, EN 55022, EN
55024, EN 61000-3-2, EN 610000-3-3, EN
61000-6-2 & EN 61000-6-4 FCC Part 15B
ü Safety: EN 60950
ü Euro RoHS
ü IP 40
• Size in mm: 71 L x 54.5 W x 75 H, Weight: 350 g
• Flame Retardant ABS casing with DIN Rail mounting
• Supports RS485 via transparent protocol
• 32-bit addressing scheme
• Four operation modes: Point-to-Point, Simple
Broadcast, Auto-Routing, and Broadcast-Routing
• One master node supports up to 240 slave nodes in
Auto-Routing and Broadcast-Routing modes
• Support user packet size of up to maximum of 512
bytes
• Distance: Up to 2km- actual distance depends on
environments
• Interface:
o PWM outputs- 150ps
o Dry Contact Relay control for up to 2KW AC
power output
o RS485, no external interface converter needed
• Preset Serial COM Port settings: 115200 Baud rate,
No Parity Bit, 8 Data Bit and 1 Stop Bit
• OFDMA Power Line Communications:
ü 18 independent channels operating with up to 54
out of 100 pre-installed carrier frequencies
between 5 kHz to 500 kHz.3QPSK, 3BPSK, or
1BPSK modulation schemes with up to 18 levels
of redundancy
ü Maximum raw data rates at Phy level between
1.22 Kbps to 7.32 Kbps depending modulation
scheme
ü Scan Frequency tool to scan for best 18 carrier
frequencies based on RSSI and Received
Success Rate for up to 8 nodes
ü Noise Indicator tool to detect noise level for
selected frequency channels
ü Debug tool to test success rate of communication
links
ü Options for operation on CENELEC A, CENELEC
B, CENELEC C, CENELEC D, FCC or ARIB
bands.
ü Rx Sensitivity: -75 dBm
•