Data Sheet

PRIMOR®
Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our products are applied, we assume no responsibility for the results
obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department is always at your disposal for any advice needed.
www.grion.eu
1Bison International B.V. - P.O. Box 160 - NL 4460 AD Goes
1233606  GRIFFON PRIMOR® AEROSOL 300 ML NL/FR/ES/DE
UnIveRsal cleanIng and degReasIng agent fOR Metal
PRODUCT DESCRIPTION
Universal cleaning and degreasing agent for metal.
FIELD OF APPLICATION
For cleaning and degreasing metals. Removes oil, dirt, grease, wax, tar,
permanent ink, brake and carbon dust, among others. Also for removing
uncured residue of 2-component adhesives, paint, silicone sealants and PU
foam. Can also be used to detect surface cracks in combination with Verimor and
Devmor.
PROPERTIES
· Rapid evaporation
· Leaves no residue
· Can be used in all positions
PREPARATION
Preliminary surface treatment: Remove as much dirt, rust, etc., as possible.
APPLICATION
Directions for use:
Shake well before use. Spray surface generously. With heavy contamination
spray, wipe with a cloth and repeat treatment.
Points of attention: In prolonged contact could damage rubbers, cured
coatings and synthetics (such as polystyrene and polycarbonate).
TECHNICAL SPECIFICATIONS
Chemical base: Mixture of solvents
Colour: Transparent
Viscosity: Runny
STORAGE CONDITIONS
A minimum of 36 months. Close the container properly and store in a dry, cool
and frost-free location.
1233606 20161225