Instructions / Assembly

(b) Raise firebox lid and from inside the Firebox
use 4 CC Round Head Screws to attach the sides
of Firebox to Cart Brace, Left (F) and Cart Brace,
Right (J). Raise Firebox slightly to align holes for
inserting and tightening screws. See (Fig. 13).
(c) From the inside of the cart, use 2 CC Round
Head Scews and 2 DD lock washers, attch Rear
Right Cart Leg (H) and Rear Left Cart Leg (C) to
the firebox.
7. Side Burner Shelf Assembly
(a) Attach Side Burner Shelf (T) with the side of
Front Right Cart Leg (G) and Rear Right Cart Leg
(H) on Loosen 4 pre-assembled AA Round Head
Screws and 4 BB Lock Washers. See (Fig. 15).
Note:Still do not fully tighten the four screws at this
point.
(b) Align the holes on Side Burner Shelf (T) with the
holes on the side of firebox, and attach from inside
of firebox using 2 CC Round Head Screws and 2
DD Lock Washers. See (Fig. 16).
(c) Connect Side Burner shelf front panel to Main
control Panel with 1 AA Round Head Screw (AA)
and 1 BB Lock Washer and 2 CC round Head
Scew. Tighten all screws. See (Fig. 16).
(d) Repeat steps (a) through (c) to install side shelf.
8. Side Burner Valve Assembly
(a) Remove side burner grate from side burner
shelf and set aside. Remove the two Phillips head
screws attaching side burner to shelf to make room
to install side burner valve. See (Fig.17)
Fig.13
Fig.15
11
Fig. 17
Fig.16
T
G H
T
Fig.14
H
C