Instructions / Assembly

(b) Remove two screws from side burner control valve

face. Insert side burner valve control stem through hole

in side burner control panel . Place side burner control

knob bezel (V) over side burner valve control stem.

Secure bezel to control panel and valve with 2 screws

removed above. (Fig . 18A1).

(Fig. 18B1). Use the two previously removed side

burner screws to reattach side burner to side burner

shelf.

(d) Push control knob (W) onto valve control stem, and

tighten use hex wrench. (Fig.19)

(e) Plug ignition wire into igniter wire hanging from

electrode on underside of burner (Fig.20).

(f) Replace the side burner grate into the side burner

shelf.

Fig. 18

Fig. 19

Fig. 20

Fig. 21

9. Battery Assembly

(a) Unscrew the ignition battery cap. (Found at far

left of control panel.)

(b) Install battery (X) into ignition box with positive

terminal facing outward.

has been installed. (Fig. 21)