- Grind Master Corporation Espresso Coffee Grinders Instruction Manual

600 SERIES ESPRESSO GRINDERS

INSTRUCTION MANUAL

WARNING - UNPLUG GRINDER FROM

OUTLET BEFORE SERVICING OR

ADJUSTING

1) Bean Hopper Lid

2) Bean Hopper

3) Grind Adjustment Dial

4) Dosing Chamber

5) Dosing Lever

6) Filter Holder Guide

7) On/Off Switch

INSTALLATION

1. Place bean hopper on grinder base

2. Press grind adjustment tab down

3. Turn grind adjustment dial clockwise until grinding burrs touch

4. Turn dial back counterclockwise five notches

5. The grinder should now be set to the correct grind (slight adjustment may

be necessary)

6. Place whole bean coffee in hopper

7. Plug grinder into grounded outlet

8. Turn power switch on

9. Open bean hopper shutoff by pulling out bean hopper shutter

10. If grinder does not start grinding, grind may need to be adjusted to a coarser

setting by turning the adjustment dial counterclockwise

HOW TO OPERATE

1. Remove bean hopper lid

2. Fill bean hopper with whole bean coffee

3. Turn the grinder “on” to fill the doser with ground coffee

For the Model 625, turn the grinder “off” when the doser is filled

For the Model 650, leave the switch in the “on” position — The grinder will

automatically turn on and refill the dosing chamber when the sensing switch

senses it is low

4. Place the filter holder under the doser outlet until it rests at the filter stop