Coffee Grinder User Manual

800 Series Coffee Grinders Page 5

Cleaning Instructions

The outside of machine can be cleaned with a damp cloth or common household polishing wax. See

Shear Disc Replacement section in this manual for instructions on assembling and disassembling the grinder

parts. All parts that are in contact with food must be washed with warm soapy water, rinsed, sanitized and

air-dried.

Note: The person cleaning the parts should do so with clean hands. Before reassembling, wipe the

motor shaft with 2 or 3 drops of common household cooking oil in the area of the feedworm engagement to

make the assembly easier.

Lubrication

All bearings have been oiled for life. No further oiling is necessary.

Figure B

GRIND CAP (ASSEMBLED)

SCREW, 5/16 X 1” LG

SHEAR DRIVE

FEEDWORM & ROTARY BURR

GRIND HEAD

SHEAR DISC

SHEAR COVER

FIGURE : B

ROLL PIN REPLACEMENT

SCREW, 5/16-18 X 1"LG

GRIND CAP (ASSEMBLED)

SHEAR COVER

FEEDWORM & ROTARY BURR

GRIND HEAD

DWG NO.: 83457 REVISION: REL

ROLL PIN

Model 865/890

SHEAR COVER

GRIND HEAD

FEEDWORM & ROTARY BURR

GRIND CAP (ASSEMBLED)

SCREW, 5/16-18 X 1” LG

ROLL PIN