SAFETY DATA SHEET Date of issue/Date of revision 1 May 2016 Version 5 Section 1. Identification Product name : V50-410 BREAK-THROUGH! INT/EXT SATIN-WHITE/PASTEL BASE Product code : 00405412 Other means of identification : Not available. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Product use : Industrial applications. Use of the substance/ mixture Uses advised against : Coating.
Product code 00405412 Date of issue 1 May 2016 Version 5 Product name V50-410 BREAK-THROUGH! INT/EXT SATIN-WHITE/PASTEL BASE Section 2. Hazards identification Prevention Response : Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves. Wear eye or face protection. Wear protective clothing. : IF exposed or concerned: Get medical attention. Storage : Store locked up.
Product code 00405412 Date of issue 1 May 2016 Version 5 Product name V50-410 BREAK-THROUGH! INT/EXT SATIN-WHITE/PASTEL BASE Section 4. First aid measures If ingestion, irritation, any type of overexposure or symptoms of overexposure occur during or persists after use of this product, contact a POISON CONTROL CENTER, EMERGENCY ROOM OR PHYSICIAN immediately; have Safety Data Sheet information available. Never give anything by mouth to an unconscious or convulsing person.
Product code 00405412 Date of issue 1 May 2016 Version 5 Product name V50-410 BREAK-THROUGH! INT/EXT SATIN-WHITE/PASTEL BASE Section 5. Fire-fighting measures Extinguishing media Suitable extinguishing media : Use an extinguishing agent suitable for the surrounding fire. Unsuitable extinguishing media : None known.
Product code 00405412 Date of issue 1 May 2016 Version 5 Product name V50-410 BREAK-THROUGH! INT/EXT SATIN-WHITE/PASTEL BASE Section 6. Accidental release measures Large spill : Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g.
Product code 00405412 Date of issue 1 May 2016 Version 5 Product name V50-410 BREAK-THROUGH! INT/EXT SATIN-WHITE/PASTEL BASE Section 8. Exposure controls/personal protection Control parameters Occupational exposure limits Ingredient name Exposure limits titanium dioxide OSHA PEL (United States, 2/2013). TWA: 15 mg/m³ 8 hours. Form: Total dust ACGIH TLV (United States, 3/2015). TWA: 10 mg/m³ 8 hours. ACGIH TLV (United States, 3/2015). TWA: 20 ppm 8 hours. OSHA PEL (United States, 2/2013).
Product code 00405412 Date of issue 1 May 2016 Version 5 Product name V50-410 BREAK-THROUGH! INT/EXT SATIN-WHITE/PASTEL BASE Section 8. Exposure controls/personal protection Environmental exposure controls : Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation.
Product code 00405412 Date of issue 1 May 2016 Version 5 Product name V50-410 BREAK-THROUGH! INT/EXT SATIN-WHITE/PASTEL BASE Section 9. Physical and chemical properties Evaporation rate : Not available. Vapor pressure : Not available. Vapor density Relative density : Not available. : 1.19 Density ( lbs / gal ) : 9.93 Solubility : Soluble in the following materials: cold water. Partition coefficient: noctanol/water : Not available. Viscosity : Kinematic (40°C (104°F)): >0.
Product code 00405412 Date of issue 1 May 2016 Version 5 Product name V50-410 BREAK-THROUGH! INT/EXT SATIN-WHITE/PASTEL BASE Section 11. Toxicological information Sensitization Conclusion/Summary Skin Respiratory : There are no data available on the mixture itself. : There are no data available on the mixture itself. Mutagenicity Conclusion/Summary : There are no data available on the mixture itself.
Product code 00405412 Date of issue 1 May 2016 Version 5 Product name V50-410 BREAK-THROUGH! INT/EXT SATIN-WHITE/PASTEL BASE Section 11. Toxicological information Skin contact : No known significant effects or critical hazards. Ingestion : No known significant effects or critical hazards. Over-exposure signs/symptoms Eye contact : No specific data. Inhalation : No specific data. Skin contact : No specific data. Ingestion : No specific data.
Product code 00405412 Date of issue 1 May 2016 Version 5 Product name V50-410 BREAK-THROUGH! INT/EXT SATIN-WHITE/PASTEL BASE Section 11. Toxicological information Route ATE value Oral Dermal Inhalation (gases) Inhalation (vapors) Inhalation (dusts and mists) 3524.4 mg/kg 8467.6 mg/kg 35947.5 ppm 87.87 mg/l 11.98 mg/l Section 12.
Product code 00405412 Date of issue 1 May 2016 Version 5 Product name V50-410 BREAK-THROUGH! INT/EXT SATIN-WHITE/PASTEL BASE 14. Transport information DOT IMDG IATA UN number Not regulated. Not regulated. Not regulated. UN proper shipping name - - - Transport hazard class (es) - - Packing group - - Environmental hazards No. No. No. Marine pollutant substances Not applicable. Not applicable. Not applicable. Additional information DOT : None identified.
Product code 00405412 Date of issue 1 May 2016 Version 5 Product name V50-410 BREAK-THROUGH! INT/EXT SATIN-WHITE/PASTEL BASE Section 15. Regulatory information SARA 313 Supplier notification Chemical name : 2-butoxyethanol CAS number 111-76-2 Concentration 5 - 10 SARA 313 notifications must not be detached from the SDS and any copying and redistribution of the SDS shall include copying and redistribution of the notice attached to copies of the SDS subsequently redistributed.