SDS

ManualsBrandsGrip Fast ManualsCollated Nails2-3/8" x .113 21° Plastic Bright Ring Shank Round Head Framing Nail - 2,500 Count

MATERIAL SAFETY DATA SHEET

STEEL PRODUCTS

ORIGINAL ISSUE DATE: 08/04/2005

Ⅰ. IDENTIFICATION

WIRE PRODUCTS

PRODUCT NAME:

STEEL PRODUCTS:

WIRE & WIRE PRODUCTS

COMMON NAME(S): SAME

1) Bright Anchor Bolt.

2) HDG Anchor Bolt.

Ⅱ. INGREDIENTS AND RECOMMENDED OCCUPATIONAL EXPOSURE LIMITS

Note: steel products under normal conditions do not present an inhalation

BASEMETAL & METALLIC

COATINGS

EXPOSURE LIMITS

CHEMICAL SYMBOL

% WT.

OSHAPEL ACGIHTLV

All Products:

Iron

Galvanized

Products:

Zinc

95.0

3.0

10.0 mg/M³

fume

5.0 mg/M³

fume

5.0 mg/M³

SEE ANNEX 1 FOR BALANCE OF INGREDIENTS. SEE ANNEX 3 FOR ANIL COATINGS.

SECTION 313 – SUPPLIER NOTIFICATION

This product contains threshold concentrations of the following toxic chemicals subjects to the reporting

requirements of Section 313 of the Emergency Planning and Community Right-to Know

Act of 1986(40CFR372):

Chromium, Manganese, Nickel and Zinc(Galvanized Coating Only) in the amounts noted above and on ANNEX 1.

This information should be included in all MSDS’s that are copied and distributed for this material.

. PHYSICAL DATE Ⅲ

SPECIFIC GRAVITY(H=0>1): 7.85 SOLUBILITY IN WATER: NONE

BOILING POINT(Iron): 4950˚F EVAPORATION RATE

(Butyl Acetate=1): N/A

MELTING POINT(Base Metal): 2400˚F VOPOR PRESSURE(mm Hg): N/A

MELTING POINT(Metallic Coating): 800˚F VOPOR DENSITY(Air 1): N/A

APPEARANCE: Metallic Grey ODOR: NONE

Ⅵ. FIRE AND EXPLOSION HAZARD DATA

Steel products in the solid state present no fire or explosion hazard.

Ⅴ. REACTIVITY DATA

Stable under normal conditions of use, storage and transport. Will react with strong acid to liberate

hydrogen. At temperatures above the melting point, may liberate fumes containing oxides of iron & alloying

elements.

Summary of content (2 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET STEEL PRODUCTS ORIGINAL ISSUE DATE: 08/04/2005 Ⅰ. IDENTIFICATION WIRE PRODUCTS 1) Bright Anchor Bolt. 2) HDG Anchor Bolt. PRODUCT NAME: STEEL PRODUCTS: WIRE & WIRE PRODUCTS COMMON NAME(S): SAME Ⅱ. INGREDIENTS AND RECOMMENDED OCCUPATIONAL EXPOSURE LIMITS Note: steel products under normal conditions do not present an inhalation BASEMETAL & METALLIC EXPOSURE LIMITS COATINGS % WT. CHEMICAL SYMBOL OSHAPEL ACGIHTLV 10.0 mg/M³ 5.0 mg/M³ fume fume 5.0 mg/M³ 5.
PAGE 2
MATERIAL SAFETY DATA SHEET STEEL PRODUCTS STEEL PRODUCTS- Anchor Bolt. ORIGINAL ISSUE DATE: 08/05/2005 TYPICAL LEVELS OF TRACE OR RESIDUAL ELEMENTS IN STEELS All steel products are alloys which consist primarily of iron(generally 95 %). However, other elements which are either added intentionally or present as contaminates or residuals may also occur in these products at trave of low level concentration(generally <1.0%).