TABLE OF CONTENTS SPECIFICATIONS SPECIFICATIONS TABLE OF CONTENTS -------------------------------- 2 SPECIFICATIONS --------------------------------------- 3 MODEL GR150 GR250 FASTENER LENGTH 1 1/2” 1 1/2” - 2 1/2” FASTENER DIA. .131 - .148” .131 - .
TABLE OF CONTENTS SPECIFICATIONS SPECIFICATIONS TABLE OF CONTENTS -------------------------------- 2 SPECIFICATIONS --------------------------------------- 3 MODEL GR150 GR250 FASTENER LENGTH 1 1/2” 1 1/2” - 2 1/2” FASTENER DIA. .131 - .148” .131 - .
SAFETY SAFETY SAFETY LABELS SAFETY INSTRUCTIONS This pneumatic fastening tool includes a warning label to help remind you of important safety information when operating the tool. The safety label must be legible at all times, and must be replaced if it becomes worn or damaged. WEAR SAFETY GLASSES Always wear safety glasses with side shields that meet ANSI Z87.1 requirements when operating the tool. Make sure all others in work area wear safety glasses.
SAFETY SAFETY SAFETY LABELS SAFETY INSTRUCTIONS This pneumatic fastening tool includes a warning label to help remind you of important safety information when operating the tool. The safety label must be legible at all times, and must be replaced if it becomes worn or damaged. WEAR SAFETY GLASSES Always wear safety glasses with side shields that meet ANSI Z87.1 requirements when operating the tool. Make sure all others in work area wear safety glasses.
SAFETY SAFETY SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS DO NOT ATTEMPT TO OPERATE THE TOOL IF THE TOOL’S OPERATING CONTROLS HAVE BEEN MODIFIED OR ARE NOT WORKING PROPERLY. Attempting to use a tool with modified or malfunctioning trigger or workpiece contact can result in a fastener being driven unintentionally. USE CORRECT FASTENERS Only use the correct fastener for the tool. Using fasteners with incorrect specifications can jam the tool or cause serious injuries.
SAFETY SAFETY SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS DO NOT ATTEMPT TO OPERATE THE TOOL IF THE TOOL’S OPERATING CONTROLS HAVE BEEN MODIFIED OR ARE NOT WORKING PROPERLY. Attempting to use a tool with modified or malfunctioning trigger or workpiece contact can result in a fastener being driven unintentionally. USE CORRECT FASTENERS Only use the correct fastener for the tool. Using fasteners with incorrect specifications can jam the tool or cause serious injuries.
DESCRIPTION DESCRIPTION 2 1 PART DESCRIPTIONS 3 4 5 6 11 GR150 9 7 8 1 2 3 4 5 11 6 1. Cylinder Cap - Covers valve and piston assembly. 2. Belt Hook - Convenient belt hook keeps tool within easy reach when both hands are needed for placement and positioning of joist hangers. 3. Handle - Cushioned handgrip provides comfortable operation. 4. Safety Warning Label - Provides important safety reminders that must be followed whenever handling, operating, or servicing the tool. 5.
DESCRIPTION DESCRIPTION 2 1 PART DESCRIPTIONS 3 4 5 6 11 GR150 9 7 8 1 2 3 4 5 11 6 1. Cylinder Cap - Covers valve and piston assembly. 2. Belt Hook - Convenient belt hook keeps tool within easy reach when both hands are needed for placement and positioning of joist hangers. 3. Handle - Cushioned handgrip provides comfortable operation. 4. Safety Warning Label - Provides important safety reminders that must be followed whenever handling, operating, or servicing the tool. 5.
OPERATION OPERATION LOADING FASTENERS OPERATION 1. Connect tool to air supply using quick-connect coupling. LOADING INSTRUCTIONS 2. Hold the tool securely using the handgrip. Do not depress tool nose until tool is in driving position and you are ready to drive a fastener. DANGER The model GR150 and GR250 tools are automatically actuated when the nail in driving position is pressed against the work surface.
OPERATION OPERATION LOADING FASTENERS OPERATION 1. Connect tool to air supply using quick-connect coupling. LOADING INSTRUCTIONS 2. Hold the tool securely using the handgrip. Do not depress tool nose until tool is in driving position and you are ready to drive a fastener. DANGER The model GR150 and GR250 tools are automatically actuated when the nail in driving position is pressed against the work surface.
GR150 PARTS SCHEMATIC GR150 PARTS LIST ITEM 12 P/N DESCRIPTION ITEM BOLT HANGER CAP GASKET O-RING COLLAR RING SPACER O-RING SEAL CYLINDER O-RING O-RING DRIVER BUMPER O-RING BODY O-RING END CAP DUST COVER AIR PLUG SPRING GUIDE BOLT 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 GRBN17 GRBN18 GRBN19 GRBN270 GRBN271 GRBN20 GRBN272 GRBN21 GRBN273 GRBN22 GRBN23 GRBN275 GRBN276 GRBN24 GRBN25 GRBN277 GRBN26 GRBN278 GRB
GR150 PARTS SCHEMATIC GR150 PARTS LIST ITEM 12 P/N DESCRIPTION ITEM BOLT HANGER CAP GASKET O-RING COLLAR RING SPACER O-RING SEAL CYLINDER O-RING O-RING DRIVER BUMPER O-RING BODY O-RING END CAP DUST COVER AIR PLUG SPRING GUIDE BOLT 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 GRBN17 GRBN18 GRBN19 GRBN270 GRBN271 GRBN20 GRBN272 GRBN21 GRBN273 GRBN22 GRBN23 GRBN275 GRBN276 GRBN24 GRBN25 GRBN277 GRBN26 GRBN278 GRB
GR250 PARTS SCHEMATIC GR250 PARTS LIST ITEM 14 P/N DESCRIPTION ITEM BOLT HANGER CAP GASKET O-RING COLLAR O-RING CYLINDER SPACER O-RING SEAL CYLINDER O-RING O-RING DRIVER UNIT BUMPER O-RING GUN BODY UNIT O-RING END CAP DUST COVER AIR PLUG DRIVER GUIDE SPRING GUIDE BOX LATCH SPRING BUSHING PIN HEX SOC. HD.
GR250 PARTS SCHEMATIC GR250 PARTS LIST ITEM 14 P/N DESCRIPTION ITEM BOLT HANGER CAP GASKET O-RING COLLAR O-RING CYLINDER SPACER O-RING SEAL CYLINDER O-RING O-RING DRIVER UNIT BUMPER O-RING GUN BODY UNIT O-RING END CAP DUST COVER AIR PLUG DRIVER GUIDE SPRING GUIDE BOX LATCH SPRING BUSHING PIN HEX SOC. HD.
MAINTENANCE TROUBLESHOOTING TOOL TROUBLESHOOTING MAINTENANCE DANGER DANGER Always disconnect tool from air supply before performing any service on tool. Correcting a problem while the tool is pressurized may result in injury from nail drive or tool operation. Always disconnect tool from air supply before performing any service on tool. Correcting a problem while the tool is pressurized may result in injury from nail drive or tool operation.
MAINTENANCE TROUBLESHOOTING TOOL TROUBLESHOOTING MAINTENANCE DANGER DANGER Always disconnect tool from air supply before performing any service on tool. Correcting a problem while the tool is pressurized may result in injury from nail drive or tool operation. Always disconnect tool from air supply before performing any service on tool. Correcting a problem while the tool is pressurized may result in injury from nail drive or tool operation.
