Use and Care Manual

TABLE OF CONTENTS

TABLE OF CONTENTS -------------------------------- 2

SPECIFICATIONS --------------------------------------- 3

SAFETY ---------------------------------------------------- 4

TOOL PARTS --------------------------------------------- 8

PARTS DESCRIPTION--------------------------------- 9

LOADING FASTENERS ----------------------------- 10

LOADING PLASTIC CAPS ---------------------------11

OPERATION --------------------------------------------- 12

MAINTENANCE ---------------------------------------- 13

PARTS SCHEMATIC---------------------------------- 14

PARTS LIST --------------------------------------------- 15

TROUBLESHOOTING ------------------------------- 16

WARRANTY --------------------------------------------- 18

SPECIFICATIONS

MODEL GRC58A Plastic Cap Stapler

STAPLE GAUGE 21 GA. (.080”) (2 mm) Flat Wire Staples

STAPLE SIZE 1/2” (12.8 mm) Crown x 5/8” (15.8 mm) Long

STAPLE CAPACITY 110 Staples

PLASTIC CAP DIA. 1-1/32” (26.2 mm) Diameter Plastic Caps

CAP CAPACITY Corded - 110 Caps (1 Strip)

Laser - 110 Caps (2 Strips)

PLASTIC CAP FEED Automatic/Pneumatic Cylinder

MAX AIR PRESSURE 120 (8.3 bar) psi

MIN AIR PRESSURE 100 (6.9 bar) psi

TOOL WEIGHT 4 lbs. (1.8 kg)

TOOL LENGTH 12 1/4” (31.1 cm) Magazine Closed

18 1/8” (46 cm) Magazine Open

TOOL HEIGHT 8.5” (21.6 cm)

TRIGGER TYPE STD. DUAL ACTION

AIR INLET 1/4 NPT

AIR CONNECTION QUICK CONNECT

LUBRICATION 10W Air Tool Oil (Provided)

IMPORTANT SAFETY INFORMATION

You must read this entire manual and familiarize yourself with all

safety, operating, and service instructions before loading, handling,

or using your tool. When used correctly, pneumatic fastening

tools provide a lightweight, powerful, and safe means of fastening.

Used improperly, these tools can cause serious injury to you and

those around you.

IMPORTANT FASTENER INFORMATION

Only GripRite™ GRCP5822 & GRCP5822L 5/8” Cap Pack Staples

and adhesive/string or laser weld plastic caps fit this tool. Use of

any other type of staple or cap will cause tool to malfunction.