Use and Care Manual

DESCRIPTION

PART DESCRIPTIONS

1. Cylinder Cap - Covers main valve and piston assembly.

2. Handle - Cushioned handgrip provides comfortable operation.

3. Air Coupling - Quick-disconnect male coupling allows quick

connection to air hose. Dust cap keeps dirt out when tool is not in

use.

4. Magazine Release - Opens fastener magazine for quick reloading

fasteners.

5. Cap Tower Door - Pivots open to permit fast reloading of plastic

caps into high capacity cap tower.

6. Follower Handle - Pull back to release tension on plastic caps and

open cap tower door.

7. Workpiece Contact - Spring-loaded contact mechanism prevents

tool from driving a fastener unless tool is pressed down and held

against a work surface.

8. Dual Action Trigger - Actuates tool when workpiece contact is

depressed against work surface. Permits contact-trip (bump fire) or

trigger-fire operation.

9. Tool Housing - Contains tool components and provides air storage

for consistent fastener drive.

10. Cap Cylinder - Air-powered cylinder drives cap feed hook. Automati-

cally feeds plastic caps for rapid cap application.

11. Cap Feed Hook - Feeds caps into fastening position.

12. Fastener Magazine - Hold fasteners securely and provides positive

feeding of fasteners into driving position.

13. Belt Hook - Durable tool hook slides on belt. Holds tool securely

and keeps it in reach for greater productivity.

Metric Hex Wrenches - Included with tool to allow tightening of

metric screws. Keep tools in tool case for periodic tightening of

screws.

Air Tool Oil - Lightweight oil formulated for use in air tools provides

proper lubrication to o-rings and internal parts.

Safety Goggles - Provide required eye protection

DESCRIPTION

TOOL PARTS