GRIZZL E EV charger Version 2 User Manual & Installation Guide ™
Grizzl-E Manual Grizzl-E Version 2: All units manufactured after June 15, 2021*. All Refurbished Units. Manual Revision: 1.7 Model Numbers: Grizzl-E Classic: Grizzl-E Avalanche Edition: Grizzl-E Special Edition: GR1-6-18-R GR1-14-24-AB GR1-14-24-PC GR1-6-24-R GR1-6-24-P GR1-6-24-P GR1-14-24-AW GR1-14-18-R GR1-14-24-R GR1-14-24-P *Check the MFG Date on the label. If the MFG date is before June 15, 2021, see Version 1 Manual.
Grizzl-E Home EV Charging Station The Grizzl-E is a simple, powerful, heavy-duty, and portable electric vehicle charging station made in Canada and built to withstand the harshest conditions. Grizzl-E comes in three different varieties Classic Black, Avalanche White, or Extreme Camo. Grizzl-E comes with either a 18ft or 24ft Premium or Regular cable. Internal design and components of the charger have been selected to provide maximum operational life of the device and be able to withstand the elements.
Basic precautions should always be followed when using electrical products, including the following: • Read all the instructions before using this product. • Children should not use this device. • Do not put fingers into the EV connector. • Do not touch live electrical parts.
Product Features GRIZZL-E™ Electric Vehicle Charging Station (EVSE) • J1772 AC Level 2 (208-240 VAC), 40A Continuous Rated (9.6 kW) • Adjustable Maximum Current Output (40A, 32A, 24A, 16A) to Support Multiple Circuit • Extreme Duty, Rigid & Compact Design: • Robust and heavy-duty aluminum cast case; airtight enclosure for indoor or outdoor use. • No user interface required with EVSE, simply Plug-in to your EV to initiate charging.
Product Specifications United Chargers GRIZZL-E™ Electric Vehicle Charging Station (EVSE) Description Specifications GR1-6-18-XX: GRIZZL-E™ EVSE, 18 ft. J1772 Cordset, Plug-in: NEMA 6-50 Plug Model Numbers GR1-6-24-XX: GRIZZL-E™ EVSE, 24 ft. J1772 Cordset, Plug-in: NEMA 6-50 Plug GR1-14-18-XX: GRIZZL-E™ EVSE, 18 ft. J1772 Cordset, Plug-in: NEMA 14-50 Plug GR1-14-24-XX: GRIZZL-E™ EVSE, 24 ft.
INSTRUCTIONS Manual United Chargers GRIZZL-E ™ Smart Electric Vehicle Charging Station (EVSE) Table of Contents 1. Introduction & Unpacking ............................................................................... 8 2. Installation Planning and Service Wiring: ...................................................... 9 2.1 Electrical Source Requirements ................................................................. 9 2.2 Grounding Instructions .........................................................
1. Introduction & Unpacking This user manual applies to the GRIZZL-E™ EVSE for Plug-in Hybrid Electric Vehicles (PHEVs) and Electric Vehicles (EVs).
2. Installation Planning and Service Wiring: WARNING: Disconnect the power supply to the charging station before installing, adjusting, or repairing the charging. Failure to do so may result in physical injury or damage to the power supply system and the charging station.
3. Adjustable Maximum Current Output The GRIZZL-E ™ charging station features the ability to adjust the maximum Charging Station current output to support 50A, 40A, 30A, or 20A Dedicated Circuit ratings as follows: Circuit Rating Maximum Charging Station Output 50A 40A (9.6 kW) 40A 32A (7.68 kW) 30A 24A (5.76 kW) 20A 16A (3.84 kW) • The Charging Station Default Factory Maximum Current Output Setting is 40A (9.
CAUTION: The LED pipe is attached to the front cover. When the front cover is removed, place it on a flat surface facing down to avoid damage to the LED pipe. 3.2 Generation 1 Grizzl-E (3 DIP Switches) The Generation 1 Grizzl-E has 3 DIP switches located at the top left corner of the circuit board. If your Grizzl-E has 4 DIP Switches please see 3.3 Generation 2 Grizzl-E (4 DIP Switches) on page 13. 1. With the front cover placed to the side, locate the DIP switch on the charging station circuit board.
2. Using a non-conductive object adjust the Maximum Current Output to either 32A, 24A or 16A, using the following combination of DIP switch settings: Maximum Current Output Switch 1 Switch 2 Switch 3 40A Maximum Current Output (Factory Default Setting) UP DOWN DOWN 32A Maximum Current Output UP DOWN UP 24A Maximum Current Output UP UP DOWN 16A Maximum Current Output UP UP UP DIP Switch Setting 3. Once the DIP Switch Setting is adjusted, reassemble the charging station.
3.3 Generation 2 Grizzl-E (4 DIP Switches) The Generation 2 Grizzl-E has 4 DIP switches located at the top left corner of the circuit board. 1. With the front cover placed to the side, locate the DIP switch on the charging station circuit board. The DIP switch is a 4-position switch on the main circuit board, located directly to the left of the LED. UP UP UP DOWN WARNING: Do not touch live electrical parts. Disconnect the power supply to the charging station before adjusting the DIP Switches.
2. Using a non-conductive object adjust the Maximum Current Output to either 32A, 24A or 16A, using the following combination of DIP switch settings: Maximum Current Output Switch 1 Switch 2 Switch 3 Switch 4 40A Maximum Current Output (Factory Default Setting) UP UP UP DOWN 32A Maximum Current Output UP DOWN UP DOWN 24A Maximum Current Output UP UP DOWN DOWN 16A Maximum Current Output UP DOWN DOWN DOWN DIP Switch Setting 3.
4. Installation 4.1 Tools & Parts Required for Installation Prior to mounting, determine the location of an acceptable mounting support. All charging station products must be anchored into a mounting support such as a 2” x 4” stud or a solid concrete wall. DO NOT mount this unit directly to a stucco/drywall/wall board.
4.2 Install the Charging Station 1. Separate the front and back piece of the mounting bracket by pushing down on the notch. Back Piece Front Piece 2. Attach the front piece of the mounting bracket to the back of the charging station using the Socket-cap screws. Ensure the top of the mounting bracket is matched with TOP the top of the charging station.
3. Secure the back piece of the mounting bracket to the wall or other suitable structure using the Robertson-head screws. The back piece of the mounting bracket has 3 holes to support attachment to various surfaces. Use the top two holes to attach the mounting bracket to a wall stud. Mounting Screw Recommendations: • For finished walls supported by wood studs, use #14 or M6 tapping screws. (Included). • For masonry walls, use M6 mechanical screws.
4. Mount the charger on the wall by securing the front piece of the mounting bracket to the back piece of the mounting bracket. 5. Secure the charger in place by inserting either the security pin or the outdoor security lock into the mounting bracket. 6. Plug the power cord into the wall outlet.
5. Wiring Connection 5.1 Optional Hardwire Connection 1. Choose the appropriate conduit in accordance with all applicable, local, and electrical safety codes and standards. 2. Using the appropriate tool, clamp the ring wire terminal to the copper wire. For noninsulated terminals, use heat shrink tube to cover the non-insulated portion of the terminal. Choose a terminal ring with the following characteristics: » Recommended Wire Strip length: 8mm (0.32in) » Width of the terminal block opening: 10.2mm (0.
CAUTION: To reduce the risk of fire, connect only to a circuit provided with the appropriate amperes minimum branch circuit overcurrent protection in accordance with the National Electrical Code, ANSI/NFPA 70, and the Canadian Electrical Code, Part I, C22.1. 6. Once the input wiring and conduit are connected, reassemble the charging station. Reinstall the charging station font cover using the following torque force to secure the (4) screws: Screw M6 Torque 16 kgf-cm 13.
6. EasyEvPlug Holster and Cable Management System The EasyEVPlug™ Holster or Tesla EasyEVPlug™ Holster is the new innovative method to protect your plug and manage your cord. It has the following features: • No need to aim – flawless plug even in the dark. • Your EV holster will always be in a convenient location. • Saves space – special angle for less wall clearance. • Integrated cable management – holds up to 25 feet of cable.
7. Charging Status Indicators and Buzzers 7.1 Indicator Lights Grizzl-E uses the following indicator lights for the charger status: LED Indicator Buzzer Description Definition No buzzer Not illuminated Power Off No buzzer Blue Steady Ready No buzzer Blue Flashing Vehicle detected No buzzer Green Flashing Charging in progress No buzzer Green Steady Buzzer beeps Red Flashing * Charging complete or no current consumed by the car Fault *See Chapter 7.
7.
8. Operation 8.1 Connect and Charge Insert the charging Connector into the EV and ensure the connector is fully seated/locked in place. Once complete, the charging session will begin. 8.2 Stop Charging 1. Unplug the charging station by pressing the connector button and removing the Charger Connector from the EV (once the connector button is depressed, the charging session terminates immediately). 2. Return the connector to the holster.
9. General Product Care and Use Information The exterior of the charging station is designed to be waterproof and dust proof (NEMA 4 Outdoor Rated). However, periodic cleaning may be required, depending on local conditions. To ensure proper maintenance of the charging station, follow these guidelines: • To avoid damaging the finish of the products, only use an automotive grade soft cleaning cloth with soap and water to remove accumulated dirt and dust.
10. Warranty and Return Policy 60 Day Product Return Policy United Chargers accepts returns within 60 days from purchase in original unopened box only. In order to return the product please contact info@unitedchargers.com. GRIZZL-E ™ EV Residential Charging Stations 3-Year or 5-Year Replacement Warranty. Grizzl-E comes with the option of a 3-year or 5-year manufacturer’s warranty. This warranty is extended by United Chargers to original purchasers of GRIZZL-E ™ EV Charging Stations.
