Replacement Part List

-2-
Model G0602Z/G0752Z (Mfd. Since 06/17)
G0602Z/G0752Z Unique Parts
953
954
955
956
957
958
959
960
961
962
963
964
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
939
933
932
931
938
958
954
956
957
965
934
935
zero
zero
zero
in
mm
mm
inch
X
Y
Z
966
401
416
417
418
402
403
404
405
406
407
408
409
410
411
412
413
414
415
MODEL G0602Z
10" X 22" LATHE with DRO
Motor: 1 HP, 110V, 1-Ph, 60 Hz
Full-Load Current Draw: 13.6A
Swing Over Bed: 9-1/2"
Swing Over Cross Slide: 6-1/8"
Distance Between Centers: 22"
Spindle Taper: MT#4
Spindle Bore: 1"
Tailstock Taper: MT#3
Cross Slide Travel: 6-1/2"
Compound Travel: 3-1/2"
Leadscrew: 3/4" x 12 TPI
Maximum Tool Bit Size: 1/2"
Weight: 330 lbs.
WARNING!
Specifications
Date
S/N
To reduce risk of serious personal injury while using this machine:
1. Read and understand owner’s manual before starting.
2. Always wear approved safety glasses AND a face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, adjusting, or servicing.
5. Avoid getting entangled in rotating parts—tie back long hair,
roll up sleeves, and DO NOT wear loose clothing, gloves, or
jewelry.
6. Rotate workpiece by hand to ensure clearance before starting.
7. Test each new workpiece setup for safe rotation; start with
slowest speed and stand to side of lathe until safe rotation
verified.
8. Keep all guards and covers in place during operation.
9. Make sure lathe is properly set up before starting.
10. Change coolant regularly and avoid contact with skin.
11. Never leave chuck key in chuck.
12. Never touch rotating chuck or workpiece with hands.
13. Never leave lathe running unattended.
14. DO NOT reverse spindle rotation while spindle is moving.
15. Properly support long workpieces with an appropriate rest.
16. DO NOT operate when tired or under influence of drugs or
alcohol.
17. DO NOT expose to rain or use in wet locations.
18. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Mfd. for Grizzly in China
MODEL G0752Z
10" x 22" VARIABLE-SPEED LATHE
Req. Power Supply: 110V, 15A, 60 Hz
Full-Load Current Rating: 12A
Motor: 1 HP, 220V, 3-Ph
Distance Between Centers: 22"
Swing Over Bed: 9-1/2"
Swing Over Cross Slide: 6-1/8"
Compound Travel: 3-1/2"
Cross Slide Travel: 6-1/2"
Spindle Type: Threaded, 1-3/4" x 8 TPI
Spindle Bore: 1"
Spindle Speed Range: 100–2000 RPM
Spindle Taper: MT#4
Tailstock Taper: MT#3
Max. Tool Bit Size: 1/2"
Weight: 330 lbs.
Specifications
Date
S/N
Mfd. for Grizzly in China
WARNING!
To reduce the risk of serious injury while using this machine:
1. Read and understand owner’s manual before starting.
2. Always wear approved safety glasses AND a face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, adjusting, or servicing.
5. Tie back long hair, roll up sleeves, and DO NOT wear loose
clothing, gloves, or jewelry.
6. Rotate workpiece by hand to ensure clearance before
starting.
7. Test each new workpiece setup for safe rotation; start with
slowest speed and stand aside until safe rotation verified.
8. Keep all guards and covers in place during operation.
9. Make sure lathe is properly set up before starting.
10. Change coolant regularly and avoid contact with skin.
11. Never leave chuck key in chuck.
12. Never touch rotating chuck or workpiece with hands.
13. Never leave lathe running unattended.
14. DO NOT reverse spindle rotation while spindle is moving.
15. Properly support long workpieces with an appropriate rest.
16. DO NOT operate when tired or under influence of drugs or
alcohol.
17. DO NOT expose to rain or use in wet locations.
18. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
1001
(G0752Z)
1001
(G0602Z)
RPM
L 100
M 160
H 250
RPM
L 800
M 1300
H 2000
L
START
SPINDLE SPEED
STOP FWD REV
M
H
MOTOR
SPINDLE
E
M
E
R
G
E
N
C
Y
S
T
O
P
G0752Z
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call [phone] or
go to www.grizzly.com.
WARNING!
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
1004
967
REF PART # DESCRIPTION REF PART # DESCRIPTION
401 P0602Z401 BED 960 P0602Z960 FLAT WASHER 3MM
416 P0602Z416 Z-AXIS SENSOR BRACKET 31 X 31 X 600 961 P0602Z961 CAP SCREW M3-.5 X 6
417 P0602Z417 CAP SCREW M4-.7 X 10 962 P0602Z962 WIRE RETAINING RING 4MM
418 P0602Z418 FLAT WASHER 4MM 963 P0602Z963 Z-AXIS SENSOR
902 P0602Z902 CROSS SLIDE 964 P0602Z964 Z-AXIS SENSOR MOUNTING PLATE
953 P0602Z953 X-AXIS SENSOR 965 P0602Z965 DIGITAL READOUT DISPLAY UNIT
954 P0602Z954 CAP SCREW M3-.5 X 16 966 P0602Z966 DRO POWER CORD 2W 18G 72" 1-15P
955 P0602Z955 X-AXIS SENSOR MOUNTING PLATE 967 P0602Z967 Z-AXIS SENSOR CONNECTING PLATE
956 P0602Z956 CAP SCREW M4-.7 X 10 1001 P0602Z1001 MACHINE ID LABEL (G0602Z)
957 P0602Z957 FLAT WASHER 4MM 1001 P0752Z1001 MACHINE ID LABEL (G0752Z)
958 P0602Z958 PLASTIC SLEEVE 6 X 7 X 3D 1004 P0752Z1004 COMBINATION LABEL (G0752Z)
959 P0602Z959 X-AXIS SENSOR BRACKET 10 X 30 X 215