Replacement Part List

-58-
Model G0621X (Mfd. Since 07/17)
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
G0621X
MODEL G0621X
VARIABLE SPEED
WOOD & METAL CUTTING BANDSAW
Power Supply: 220V, 1-Phase, 15A
Motor: 1-1/4 HP, 220V, 3-Phase, 4.8A
Full Load Current (w/VFD): 13A
Table Size: 16" x 20"
Blade Speeds: 150–3000 FPM
Blade Length: 108"
Blade Width Range: 1/8" – 1"
Max. Cutting Width Left of Blade: 13-1/2"
Max. Cutting Height: 10"
Table Tilt: 5˚L ⁄ 45˚R
Weight: 261 lbs.
Specifications
Date
SN
Mfd. for Grizzly in Taiwan
To reduce risk of serious injury when using this machine:
1. Read & understand owner’s manual before operating.
2. Never touch moving blade & keep hands out of blade path.
3. Always wear approved eye protection and respirator.
4. Only remove jammed cutoff pieces when blade is stopped.
5. Use push stick or holding jig to cut small or narrow pieces.
6. Turn motor OFF and disconnect power before changing
blades, making adjustments, or servicing.
7. Maintain adjustment of blade tension, tracking, & guides.
8. Keep upper guide adjusted to just clear the workpiece.
9. Hold workpiece firmly against table to maintain control.
10. Only run saw with wheel covers closed & all guards in place.
11. Never reach under table while blade is in motion.
12. Secure/remove loose clothing and long hair.
13. DO NOT expose to rain, moisture or wet locations.
14. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Fire Hazard!
Clean out all wood
dust from inside and
outside bandsaw
before cutting metal.
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
401
402
403
404
405
406
407
408
409
410
411
412
413
414
BLADE TENSION
SCALE
1
1
⁄4"
1"
0"0"
3
⁄4"
3
⁄8"
1
⁄4"
1
⁄2"
Align indicator with
scale line that matches
installed blade width.
INJURY HAZARD
Keep door closed
while blade is in
motion. Disconnect
power before
opening door.
WARNING!
READ and UNDERSTAND
instruction manual to
avoid serious injury. If a
manual is not available,
DO NOT use machine. Go
to www.grizzly.com or
call [phone].
WARNING!
ON
OFF
DO NOT remove this plate.
SLOW FAST
NOTICE
Wood 6 – 10 2200 +
Aluminum 6 – 14 220 – 534
Copper Pipe 14 – 22 390 – 990
Copper Plate 12 – 22 390 – 590
Copper Cast 6 – 12 195 – 390
Steel 18 – 24 150 – 200
Cast Iron 16 – 24 150 – 200
MATERIAL TPI SPEED (FPM)
Thick workpieces cut best with a
slower speed and fewer TPI.
Thin workpieces cut best with a
higher speed and more TPI.
Labels & Cosmetics
REF PART # DESCRIPTION REF PART # DESCRIPTION
401 P0621X401 MACHINE ID LABEL 408 P0621X408 MOTOR SWITCH ON/OFF LABEL
402 P0621X402 MODEL NUMBER LABEL 409 P0621X409 SPEED DIAL LABEL
403 P0621X403 DOOR CLOSED LABEL 410 P0621X410 CUTTING CHART LABEL
404 P0621X404 BLADE TENSION LABEL 411 P0621X411 TOUCH-UP PAINT, GRIZZLY GREEN
405 P0621X405 GLASSES/RESPIRATOR LABEL 412 P0621X412 GRI ZZLY LOGO PLATE
406 P0621X406 READ MANUAL LABEL 413 P0621X413 FIRE HAZARD LABEL
407 P0621X407 ELECTRICITY LABEL 414 P0621X414 TOUCH-UP PAINT, GRIZZLY PUTTY
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact [phone] or www.grizzly.com.