Use and Care Manual

-46-
Model G0694 (Mfd. Since 03/15)
29. Thread the handwheel onto the mounting
hub, then tighten the outer set screws on the
mounting hub (see Figure 70).
Figure 70. Securing handwheel.
Figure 69. Threading on mounting hub.
28. Slide the mounting hub onto the adapter (see
Figure 69), making sure the shoulder of the
hub faces the headstock, then tighten the
inner set screws on the hub.
30. Re-install the belt on the appropriate motor
pulley groove.
31. Properly re-tension the belt (refer to
Tensioning Belt on Page 41 for detailed
instructions).
Shoulder
Adapter