Use and Care Manual

-20-
Model G0720R (Mfg. Since 11/10)
Mini Digital Protractor
The mini digital protractor shown in Figure 13
displays the headstock spindle angle and slope
in relationship with the table surface. An auto
shut-off feature will turn OFF the unit after sev-
eral minutes of idle time. When turned back ON,
the last measurement is recalled so work can be
resumed. However, if the battery is changed or
becomes discharged, the stored value is lost.
Figure 13. Mini digital protractor.
S T U V
Q
R
Q. Tilt Arrows: Indicate the direction of tilt.
R. Battery Life: Icon becomes viewable when
batteries need replacement.
S. ON/OFF Button: Turns the protractor ON or
OFF. For OFF, press and hold the button.
T. O%: Toggles units of measure between
degrees and percent of grade conventions.
U. Calibrate: Zeros the protractor at any position
within the range of headstock tilt.
V. HOLD: Locks the protractor at its current
displayed value.
Digital Spindle Height Gauge
The digital spindle height scale shown in Figure
12 displays spindle position and movement. An
auto shut-off feature will turn the unit OFF after
several minutes of idle time. When turned back
ON, the last measurement is recalled so work can
be resumed. However, if the battery is changed or
becomes discharged, the stored value is lost.
Figure 12. Digital spindle height scale.
O
N
P
M
4 8 07
.
.
.
0 600
FORWARD
REVERSE
TAPPING
M. Digital Spindle Height Display: Displays
spindle position and movement with a
resolution of 0.0005" (0.01mm).
N. ZERO Button: Zeros the digital spindle scale
at any point along its stroke.
O. mm/inch Button: Toggles units of measure
between metric and inch conventions.
P. OFF/ON Button: Turns the digital height
gauge ON or OFF.