Use and Care Manual

-16-
Model G4181/G7873 (Mfd. Since 12/13)
You MUST assemble all guards, fences, and
holdowns before starting your machine or
power feeder. Failure to heed this warning
could result in serious personal injury.
Figure 8. Assembled unit.
C
To correctly position this power feeder on your
table top, completely assemble the power feeder
first in the order of A, B and C as shown in
Figures 7 and 8. Next, refer to Base Mounting
on Page 15. With the power feeder unit com-
pletely assembled, it will be easier to locate where
on the table top you will need to drill your base
mounting holes, so you can take advantage of the
full range of power feeder swing and adjustments.
Figure 7. Stand assembly.
B
A
Assembly