Specification

The information contained herein is deemed accurate as of 6/24/2019 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 1 OF 2
Model G7214Z
MACHINE DATA
SHEET
Customer Service #: [phone] · To Order Call: [phone] · Fax #: [phone]
MODEL G7214Z 7‐1/2 HP 3‐PHASE SPINDLE SHAPER
Product Dimensions:
Weight.............................................................................................................................................................. 573 lbs.
Width (side-to-side) x Depth (front-to-back) x Height............................................................... 34-3/4 x 35-1/2 x 43 in.
Footprint (Length x Width)............................................................................................................................ 26 x 27 in.
Shipping Dimensions:
Type.......................................................................................................................................................... Wood Crate
Content........................................................................................................................................................... Machine
Weight.............................................................................................................................................................. 613 lbs.
Length x Width x Height....................................................................................................................... 40 x 30 x 43 in.
Must Ship Upright................................................................................................................................................... Yes
Electrical:
Power Requirement..................................................................................................... 220V or 440V, 3-Phase, 60 Hz
Prewired Voltage.................................................................................................................................................. 220V
Full-Load Current Rating..................................................................................................... 20A at 220V, 10A at 440V
Minimum Circuit Size.......................................................................................................... 30A at 220V, 15A at 440V
Connection Type............................................................................... Cord at 220V, Permanently Connected at 440V
Power Cord Included............................................................................................................................................... No
Recommended Power Cord................................................................ “S”-Type, 4-Wire, 10 AWG, 300 VAC for 220V
Recommended Plug Type.................................................................................................................. L15-30 for 220V
Switch Type............................................................................................ Control Panel w/Magnetic Switch Protection
Voltage Conversion Kit................................................................................................................ P7214Z156 for 440V
Recommended Phase Converter....................................................................................................................... G7978
Motors:
Main
Horsepower............................................................................................................................................. 7.5 HP
Phase.................................................................................................................................................... 3-Phase
Amps..................................................................................................................................................... 20A/10A
Speed................................................................................................................................................ 3450 RPM
Type........................................................................................................................................... TEFC Induction
Power Transfer .................................................................................................................................. Belt Drive
Bearings..................................................................................................... Shielded & Permanently Lubricated
Centrifugal Switch/Contacts Type................................................................................................................ N/A
Main Specifications:
Operation Info
Max. Cutter Height................................................................................................................................. 5-1/8 in.
Max. Cutter Diameter............................................................................................................................ 5-7/8 in.
Spindle Sizes.............................................................................................................................. 3/4, 1, 1-1/4 in.
Spindle Lengths...................................................................................................................................... 6 - 7 in.
Exposed Spindle Length........................................................................................................... 5-7/8 – 6-7/8 in.
Spindle Cap. Under the Nut.............................................................................................. 4-1/4, 4-5/8, 5-1/8 in.
Spindle Speeds................................................................................................ 3600, 5100, 8000, 10,000 RPM
Spindle Travel........................................................................................................................................ 3-1/4 in.
Spindle Openings...................................................................................................................... 2, 3, 3-1/2, 7 in.