MODEL G9956 HEAVY DUTY DOUBLE AIR FILTER OWNER'S MANUAL (For models manufactured since 8/15) COPYRIGHT © APRIL, 2004 BY GRIZZLY INDUSTRIAL, INC. REVISED MARCH, 2017 (TR) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death. The owner of this machine/tool is solely responsible for its safe use.
Table of Contents INTRODUCTION................................................ 2 Manual Accuracy............................................ 2 Contact Info.................................................... 2 Machine Description....................................... 2 Identification.................................................... 3 Accessories..................................................... 3 Machine Data Sheet....................................... 4 SECTION 1: SAFETY............................
INTRODUCTION Manual Accuracy Contact Info We are proud to provide a high-quality owner’s manual with your new machine! We stand behind our machines! If you have questions or need help, contact us with the information below. Before contacting, make sure you get the serial number and manufacture date from the machine ID label. This will help us help you faster. We made every effort to be exact with the instructions, specifications, drawings, and photographs in this manual.
Identification Eye Bolt Remote Control Primary Filter Main Switch Power Cord Thermal Breaker Pull Chain Switch Figure 1. Front and rear view of G9956 air filter. To reduce the risk of serious injury when using this machine, read and understand this entire manual before beginning any operations. ACCESSORIES Accessories Some aftermarket accessories can be installed on this machine that could cause it to function improperly, increasing the risk of serious personal injury.
Machine Data Sheet mACHINe dATA SHeeT Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 model G9956 RemoTe-CoNTRolled HeAVY-dUTY doUBle AIR FIlTeR Product Dimensions: Weight ............................................................................................................................................................................. 73 lbs. Length/Width/Height .............................................................................................
Main Specifications: Operation Information Air Suction Capacity .........................................................................................................................................1400 CFM Impeller Type ...............................................................................................................................................Squirrel Cage Impeller Size .....................................................................................................................
SECTION 1: SAFETY For Your Own Safety, Read Instruction Manual Before Operating This Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.
WEARING PROPER APPAREL. Do not wear clothing, apparel or jewelry that can become entangled in moving parts. Always tie back or cover long hair. Wear non-slip footwear to reduce risk of slipping and losing control or accidentally contacting cutting tool or moving parts. HAZARDOUS DUST. Dust created by machinery operations may cause cancer, birth defects, or long-term respiratory damage. Be aware of dust hazards associated with each workpiece material.
Additional Safety for Air Filters Long-term respiratory damage can occur from using this filter to capture hazardous dust without proper use of a respirator. Collecting flammable or combustible liquids, vapors, or explosive dusts can cause fire or explosions, resulting in smoke inhalation, serious burns, or death. An improperly secured air filter can fall, causing head injuries. To reduce the risk of these hazards, operator and bystanders MUST completely heed hazards and warnings below. LUNG PROTECTION.
SECTION 2: POWER SUPPLY Availability Before installing the machine, consider the availability and proximity of the required power supply circuit. If an existing circuit does not meet the requirements for this machine, a new circuit must be installed. To minimize the risk of electrocution, fire, or equipment damage, installation work and electrical wiring must be done by an electrician or qualified service personnel in accordance with all applicable codes and standards.
Grounding & Plug Requirements This machine MUST be grounded. In the event of certain malfunctions or breakdowns, grounding reduces the risk of electric shock by providing a path of least resistance for electric current. This machine is equipped with a power cord that has an equipment-grounding wire and a grounding plug. Only insert plug into a matching receptacle (outlet) that is properly installed and grounded in accordance with all local codes and ordinances.
SECTION 3: SETUP Needed for Setup Inventory The following are needed to complete the setup process, but are not included with your machine. The following is a list of items shipped with your machine. Before beginning setup, lay these items out and inventory them. Description Qty • Additional People.................................... 1–2 • Safety Glasses Per Person......................... 1 • Drill.............................................................. 1 • Drill Bit 1⁄ 8"........................
Power Connection Test Run To avoid unexpected startups or property damage, use the following steps whenever connecting or disconnecting the machine. Before you install the model G9956, bench-test the unit to make sure it runs properly. 1. Turn the machine power switch OFF. Connecting Power 1. Set the main switch to "Remote Control." 2. Insert the power cord plug into a matching supply receptacle. machine is Insert the 2. power power cord plug The into a matching now connected to the power source.
Site Planning Site planning is an important step to maximize the effectiveness of the hanging air filter. Air circulation must be thought out and all obstructions to the air path considered. The directional vents will have little effect if the air filter is placed too close to obstructions, resulting in poor air circulation, as shown in the Figure below. In this situation, the velocity of the air is lost and circulation is diminished.
It is very important that the hanging air filter be supported properly. Please follow these guidelines when planning where to mount the unit: • Where the eye bolts attach is the top of the unit. The hanging air filter can only be secured by the eye bolts on its top. • Make sure that an electrical outlet with a properly grounded receptacle is available at the location you choose.
Attaching Eye Bolts 3. 1. If the 1⁄4"-20 hex nuts are not already on the eye bolts, thread one onto each eye. 2. Thread one eye bolt into each hole on the top of the double air filter, as shown in Figure 8, using as much of the available thread as possible. Thread the lag eye bolts into the pilot holes, as shown in Figure 9. Be sure to thread the bolts at least 11/2" into the joists. Note: DO NOT use hooks in place of lag eye bolts. If the double air filter is bumped it could fall.
SECTION 4: OPERATIONS Remote Control Damage to your eyes and lungs could result from using this machine without proper protective gear. Always wear safety glasses and a respirator when operating this machine. 1. Connect power to the air filter. 2. Set the main switch to “Remote Control.” 3. Push the ON/HR button on the remote control to turn the air filter ON. Push OFF to turn it OFF.
Fan Speeds & Timer You can adjust the fan speed and the length of time the air filter operates by programming it with the included remote control. The ON/HR button allows you to toggle between fan speed and timer control functions. The five speed lights correspond to the five fan speeds. The following table shows the correlation between the number of lights illuminated on the remote and the fan speed. No. of Lights 2. —Each time this button is pressed, the fan speed increases.
Filtering Performance The Model G9956 will recirculate the volume of air in a 20' x 20' x 8' room approximately 26 times in one hour. Machine Storage When the air filter is not in use, unplug the power cord from the power source. Place the cord away from potential damage sources, such as high traffic areas, sharp objects, heat sources, harsh chemicals, water, damp areas, etc. We recommend that the volume of air in your room be recirculated at least 6-8 times every hour.
SECTION 5: MAINTENANCE Cleaning Filters 2. The frequency of use directly affects how often the filters must be cleaned or serviced. Primary Filter To maintain optimal operation, check the filters approximately every 40 hours of use in light or moderately dusty environments. In very dusty environments, check the filters every eight hours of use. Always wear a respirator when checking, changing, or servicing the filters. Unplug air filter before performing all maintenance procedures.
SECTION 6: SERVICE Review the troubleshooting and procedures in this section if a problem develops with your machine. If you need replacement parts or additional help with a procedure, call our Technical Support at (570) 546-9663. Note: Please gather the serial number and manufacture date of your machine before calling.
Remote Control Battery Replacement The remote control uses one 9V battery. To replace it, remove the battery compartment cover (see Figure 14), install a new battery, and replace the cover. Tip: If you use the air filter infrequently, remove the battery when the unit is not used. This will reduce battery drainage from the remote control. Battery Cover Figure 14. Remote control battery compartment cover removed. Model G9956 (Mfg.
machine SECTION 7: WIRING These pages are current at the time of printing. However, in the spirit of improvement, we may make changes to the electrical systems of future machines. Compare the manufacture date of your machine to the one stated in this manual, and study this section carefully. If there are differences between your machine and what is shown in this section, call Technical Support at (570) 546-9663 for assistance BEFORE making any changes to the wiring on your machine.
Electrical Components Figure 15. Remote unit exterior view. Figure 17. Remote wiring inside view. Figure 16. Motor and remote unit. Model G9956 (Mfg.
Wiring Diagram 120 Volt Motor Ground Run Capacitor 20 MFD 250VAC Remote Unit SEG5 RECEIVER REV.B Transmit 16(4)A 250V-T120 Pull Chain Switch Breaker/Reset (viewed from behind) 2A 1A 2 1 2B 1B Switch (viewed from behind) Neutral Hot Ground -24- READ ELECTRICAL SAFETY ON PAGE 22! 5-15 Plug 120 VAC Model G9956 (Mfg.
SECTION 8: PARTS Main Breakdown 24 30 13 51 18 20 17 19 31 12 4 29 1 8 15 32 16 33 3V2 36V2 2 5 23 50 38V2 37 22 39V2 40 34 10 24V2 35 48 49 34 10 11 43 21V2 14 11 26 25 42 47 46 41 27 Model G9956 (Mfg.
Main Parts List REF PART # DESCRIPTION REF PART # 1 2 3V2 4 5 8 10 11 12 13 14 15 16 17 18 19 20 21V2 22 23 24V2 25 26 5-MICRON PRIMARY FILTER 1-MICRON SECONDARY FILTER BODY V2.03.12 EYE BOLT 1/4-20 X 7/8 HANDLE PHLP HD SCR M4-.7 X 8 OUTLET PORT PHLP HD SCR 10-24 X 1/2 SWITCH COVER REMOTE RECEIVER PWR CORD 110V, LONG W/PLUG SWITCH CIRCUIT BREAKER 3AMP CHAIN SWITCH SWITCH CONNECTOR CIRCUIT BREAKER CONNECTOR JUMP CONNECTOR FAN HOUSING V2.12.09 CAPACITOR COVER PHLP HD SCR 10-24 X 3/4 PLASTIC FAN V2.12.
WARRANTY CARD Name _____________________________________________________________________________ Street _____________________________________________________________________________ City _______________________ State _________________________ Zip _____________________ Phone # ____________________ Email _________________________________________________ Model # ____________________ Order # _______________________ Serial # __________________ The following information is given on a voluntary basis.
FOLD ALONG DOTTED LINE Place Stamp Here GRIZZLY INDUSTRIAL, INC. P.O.
WARRANTY & RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
