Use and Care Manual

-20-
G9969 Radial Drill Press
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
SECTION 4: OPERATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Safety Switch Key
To prevent the machine from starting, remove the
safety switch key (Figure 17) from the paddle
switch.
Figure 17. Removing key to disable switch.
Changing Bits
The Model G9969 is equipped with a key chuck,
which can be opened and securely closed by
using the included chuck key. Any drill bit you
install in the chuck must be installed tightly
enough that it will not come loose during opera-
tion.
To install a drill bit:
1. UNPLUG THE DRILL PRESS!
2. Open the drill chuck wide enough to accept
the shank of the drill bit.
3. Insert the drill bit as far as possible into the
chuck WITHOUT allowing the chuck jaws to
touch the fluted portion of the bit, and hand
tighten the chuck.
Wear safety glasses when
operating this machine.
Serious injury may occur
if this warning is ignored!