Use and Care Manual

-4-
Model T28780 T28781 (Mfd. Since 04/20)
Controls &
Components
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
A. T-Slot. Provides secure attachment point
for router table accessories, such as miter
gauge, jigs, featherboards, etc.
B. Fence. Provides workpiece support during
router operations. T-slots allow attachment of
hold-downs, featherboards, etc.
C. Router Bit Guard. Provides workpiece vis-
ibility while shielding user during operations.
D. Fence Locks. Tighten and loosen fence
assembly for front-to-rear adjustment.
E. ON/OFF Switch. Turns router ON and OFF.
Remove key to disable switch.
F. Fence Locks. Tighten and loosen infeed/
outfeed fences for side-to-side adjustment.
G. Dust Port. 4" dust port connects to user's
dust-collection system.
H. Mounting Plate. Attaches router to table.
I. Table Insert. Provides additional workpiece
control and safety near bit during operations.
J. Carriage Lock. Secures carriage position to
prevent movement during operations.
K. Index Ring. Insert crank handle and rotate to
move carriage up and down.
Figure 1. Router table controls (front).
A
B C
D
E
Figure 2. Router table controls (rear).
F
G
Figure 3. Mounting plate components.
J
H
I
K