Use and Care Manual

-16 -
Model T28798 (Mfd. Since 01/20)
6. Install air filters in same sequence shown in
Figure 10.
4. Open access door. Remove protective wrap
from collection drawer, and insert collection
drawer where shown in Figure 8. Close and
latch access door.
Figure 8. Collection drawer installed in dust
collector.
Access
Door
Collection Drawer
Filter Door
5. Open filter door and verify dust tray is
installed, as shown in Figure 9.
Figure 9. Dust tray installed below filter door.
Dust Tray
Filter Door
Figure 10. Install air filters in this sequence.
Active
Carbon
Filter
Stainless
Mesh Filter
Filter Door
Pleated
Micro Filter
7. Close and latch filter door.
8. Attach dust collection ducting to dust port(s).
(Refer to Page 17 for suggestions about
collection ducting and metal dust collection
components.)