User Manual



8. 

   
Figure 16
Figure 16.
9.         
       
Figure 17
Figure 17.





To select a blade that is correct for your
operation, refer to Blade Terminology and
Blade Pitch beginning on Page 25.
10.       Blade
ChangesPage 27
Power Connection
After you have completed all previous setup
instructions and circuit requirements, the machine
is ready to be connected to the power supply.
To avoid unexpected startups or property dam-
age, use the following steps whenever connecting
or disconnecting the machine.

Connecting Power
Figure 18. Connecting power.
1. TurnthemachinepowerswitchOFF.
2. Insert the power cord plug into a matching
power supply receptacle. The machine is
nowconnectedtothepowersource.
Disconnecting Power
Figure 19. Disconnecting power.
1. TurnthemachinepowerswitchOFF.
2. Graspthemoldedplugandpullitcompletely
outofthereceptacle.Donotpullbythecord
asthismaydamagethewiresinside.