User guide

Model G0733 (Mfg. Since 10/11)
-35-
H6267—1
1
⁄4" x 8 TPI Chuck
This 4-Jaw, self-centering chuck with dovetailed
jaws is great for small bowl and plate turning.
The feature jaws that grip by clamping around
the workpiece or expanding to fit a turned recess.
Compact design makes it ideal for small lathes.
Figure 57. 1
1
⁄4" x 8 TPI Chuck.
Swan Neck
T10117—Big Mouth Dust Hood with Stand
Capture dust from any machine operation with
this Big Mouth Dust Hood. Simply attach a 4" dust
collection hose and adjust the hood right where
you need it. The free standing base eliminates
complicated machine set-ups and the tilting 16
3
⁄8"
x 12
7
⁄8" hood adjusts from 23" to 43" high. Every
shop needs one of these!
Figure 59. T10117 Big Mouth Dust Hood.
Recommended Metal Protectants
G5562—SLIPIT
®
1 Qt. Gel
G5563—SLIPIT
®
12 oz Spray
G2871—Boeshield
®
T-9 12 oz Spray
G2870—Boeshield
®
T-9 4 oz Spray
H3788—G96
®
Gun Treatment 12 oz Spray
H3789—G96
®
Gun Treatment 4.5 oz Spray
Figure 58. Recommended products for protect-
ing unpainted cast iron/steel part on machinery.
G5683—Magnetic Base Light
Light up your work just where you need it. This
flexible neck lamp attaches with the twist of a
switch so that you can use on any machine.
Figure 55. Magnetic base light.
H2371—GOOD STUFF Wood Finish 1 Pint
H2372—GOOD STUFF Wood Finish 1 Quart
For bare wood surfaces, this fast drying synthetic
oil has been formulated to enhance the natural
look of wood. Non-toxic, alcohol resistant and
FDA approved for food contact. Sold in 1 pint and
1 quart quantities!
Figure 56. GOOD STUFF bare wood finish.