User Manual



SECTION 4: OPERATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Operation Safety
Welder Duty Cycle
       

    
        

     
 

         

ON


          

       
        
       
 
     


Note: Most electrodes used with stick welding are
consumed within a few minutes, so the welder
has a chance to cool down when the welding cir-
cuit is stopped to install a new electrode.
However, with TIG welding, the operator needs to
plan his work within the duty cycle constraints of
the welder.
Damage to your eyes and lungs could result
from using this machine without proper
protective gear. Always wear safety glasses,
welder's helmet, and a respirator when oper-
ating this welder.

        
  
   



Always treat the welding components as if
they carry live welding current, even when
the welder reaches the duty cycle limit and
shuts down. When the welder re-establishes
the welding current, the electrode and work
leads will immediately carry live welding cur-
rent. Ignoring this warning could result in
death or serious personal injury.