User Manual



Welder Controls
NOTICE
After completing the welding operation,
keep the power to the welder ON for a
period of time to let the welder fan cool
the welder down. To avoid damage to your
welder, never shut the power OFF before
the welder enclosure is completely cool to
the touch.
A. Output Current Dial:    




B. Square Wave Percentage:    
      
       
      
        
       

C. Downslope Current Dial:    


OFF
D. Power Light: 
ON
E. Warning Light:
Not Lit:
Yellow:      
   
       

Green:       

Red:
F. Post-Flow Time Dial: 
       
     

G. Welding Current:    

H. Stick/TIG Selector: 

Figure 7.
  
 

 